參數資料
型號: MB90F523BPFV
元件分類: 微控制器/微處理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP120
封裝: PLASTIC, QFP-120
文件頁數: 32/99頁
文件大?。?/td> 978K
代理商: MB90F523BPFV
MB90520A/520B Series
38
3.
Watchdog Timer
The watchdog timer is a timer/counter used to detect faults such as program runaway.
The watchdog timer is a 2-bit counter that counts the clock signal from the timebase timer or clock timer.
Once started, the watchdog timer must be cleared before the 2-bit counter overflows. If an overflow occurs,
the CPU is reset.
Interval time for the watchdog timer
* : The difference between the maximum and minimum watchdog timer interval times is due to the timing when the
counter is cleared.
* : As the watchdog timer is a 2-bit counter that counts the carry-up signal from the timebase timer or clock timer,
clearing the timebase timer (when operating on HCLK) or the clock timer (when operating on SCLK) lengthens
the time until the watchdog timer reset is generated.
Watchdog timer count clock
Events that stop the watchdog timer
1 : Stop due to a power-on reset
2 : Reset due to recovery from hardware standby mode
3 : Watchdog reset
Events that clear the watchdog timer
1 : External reset input from the RST pin.
2 : Writing “0” to the software reset bit.
3 : Writing “0” to the watchdog control bit (second and subsequent times) .
4 : Changing to sleep mode (clears the watchdog timer and temporarily halts the count) .
5 : Changing to pseudo-clock mode (clears the watchdog timer and temporarily halts the count) .
6 : Changing to clock mode (clears the watchdog timer and temporarily halts the count) .
7 : Changing to stop mode (clears the watchdog timer and temporarily halts the count) .
HCLK : Oscillation Clock (4 MHz)
SCLK : Sub-Clock (8.192 kHz)
Min
Max
Clock Period
Min
Max
Clock Period
Approx. 3.58 ms
Approx. 4.61 ms
214
± 211 / HCLK Approx. 0.438 s Approx. 0.563 s 212 ± 29 / SCLK
Approx. 14.33 ms
Approx. 18.30 ms
216
± 213 / HCLK Approx. 3.500 s Approx. 4.500 s 215 ± 212 / SCLK
Approx. 57.23 ms
Approx. 73.73 ms
218
± 215 / HCLK Approx. 7.000 s Approx. 9.000 s 216 ± 213 / SCLK
Approx. 458.75 ms Approx. 589.82 ms 221
± 218 / HCLK Approx. 14.00 s Approx. 18.00 s 217 ± 214 / SCLK
WTC : WDCS
HCLK : Oscillation clock
PCLK : PLL clock
SCLK : Sub-clock
“0”
Count the clock timer output.
“1”
Count the timebase timer output.
相關PDF資料
PDF描述
MB90522APFF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90523APFF 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90522BPFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90522APFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
MB90523APFV 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP120
相關代理商/技術參數
參數描述
MB90F523BPM1R-GE1 制造商:FUJITSU 功能描述:
MB90F523BPMC1-GE1 制造商:FUJITSU 功能描述:
MB90F543GPF-GE1 功能描述:IC MCU 16BIT 制造商:cypress semiconductor corp 系列:F2MC-16LX MB90540G 包裝:托盤 零件狀態:在售 核心處理器:F2MC-16LX 核心尺寸:16-位 速度:16MHz 連接性:CAN,EBI/EMI,SCI,串行輸入/輸出,UART/USART 外設:POR,WDT I/O 數:81 程序存儲容量:128KB(128K x 8) 程序存儲器類型:閃存 EEPROM 容量:- RAM 容量:6K x 8 電壓 - 電源(Vcc/Vdd):4.5 V ~ 5.5 V 數據轉換器:A/D 8x8/10b 振蕩器類型:外部 工作溫度:-40°C ~ 105°C(TA) 封裝/外殼:100-BQFP 供應商器件封裝:100-PQFP(20x14) 標準包裝:66
MB90F543GPFR-GE1 制造商:FUJITSU 功能描述:
MB90F543GSPFR-GE1 制造商:FUJITSU 功能描述: