![](http://datasheet.mmic.net.cn/30000/MB90673PF_datasheet_2367563/MB90673PF_7.png)
MB90670/675 Series
7
(Continued)
*: Varies with conditions such as the operating frequency. (See section “s ELECTRICAL CHARACTERISTICS.”)
Assurance for the MB90V670 is given only for operation with a tool at a power voltage of 2.7 V to 5.5 V, an
operating temperature of 0
°C to 70°C, and an operating frequency of 1.5 MHz to 16 MHz.
s PACKAGE AND CORRESPONDING PRODUCTS
: Available
× : Not available
Note: For more information about each package, see section “s PACKAGE DIMENSIONS.”
Part number
Item
MB90676
MB90677
MB90678
MB90T678
MB90P678
MB90V670
Input capture (ICU)
Number of channels: 4
Rewriting a register value upon a pin input (rising, falling, or both edges)
DTP/external inter-
rupt circuit
Number of inputs: 4
Started by a rising edge, a falling edge, an “H” level input, or an “L” level input.
External interrupt circuit or extended intelligent I/O service (EI2OS) can be used.
Wake-up interrupt
Number of inputs: 8
Started by an “L” level input.
Delayed interrupt
generation module
An interrupt generation module for switching tasks used in realtime operating systems.
I2C interface
Serial I/O port for supporting Inter IC BUS
Timebase timer
18-bit counter
Interrupt interval: 1.024 ms, 4.096 ms, 16.384 ms, 131.072 ms
(at oscillation of 4 MHz)
Watchdog timer
Reset generation interval: 3.58 ms, 14.33 ms, 57.23 ms, 458.75 ms
(at oscillation of 4 MHz, minimum value)
Low-power con-
sumption (stand-
by) mode
Sleep/stop/CPU intermittent operation/timebase timer/hardware stand-by
Process
CMOS
Power supply volt-
age for operation*
2.7 V to 5.5 V
Package
MB90671
MB90672
MB90673
MB90T673
MB90P673
MB90676
MB90677
MB90678
MB90T678
MB90P678
MB90V670
FPT-80P-M05
×××
FPT-80P-M06
×××
FPT-100P-M05
××
×
FPT-100P-M06
××
×