參數資料
型號: MB95F562KWQN-G-JNE1
廠商: FUJITSU LTD
元件分類: 微控制器/微處理器
英文描述: MICROCONTROLLER, PQCC32
封裝: 5 X 5 MM, 0.80 MM HEIGHT, PLASTIC, M19, QFN-32
文件頁數: 56/84頁
文件大?。?/td> 3929K
代理商: MB95F562KWQN-G-JNE1
MB95560H/570H/580H Series
6
DS702-00010-1v0-E
MB95580H Series
(Continued)
Part number
Parameter
MB95F582H
MB95F583H
MB95F584H
MB95F582K
MB95F583K
MB95F584K
Type
Flash memory product
Clock
supervisor
counter
It supervises the main clock oscillation.
Flash memory
capacity
8 Kbyte
12 Kbyte
20 Kbyte
8 Kbyte
12 Kbyte
20 Kbyte
RAM capacity
240 bytes
496 bytes
240 bytes
496 bytes
Low-voltage
detection reset
No
Yes
Reset input
Dedicated
Selected through software
CPU functions
Number of basic instructions
: 136
Instruction bit length
: 8 bits
Instruction length
: 1 to 3 bytes
Data bit length
: 1, 8 and 16 bits
Minimum instruction execution time : 61.5 ns (machine clock frequency = 16.25 MHz)
Interrupt processing time
: 0.6 s (machine clock frequency = 16.25 MHz)
General-
purpose I/O
I/O ports (Max) : 12
CMOS I/O
: 11
N-ch open drain: 1
I/O ports (Max) : 13
CMOS I/O
: 11
N-ch open drain: 2
Time-base timer Interval time: 0.256 ms to 8.3 s (external clock frequency = 4 MHz)
Hardware/
software
watchdog timer
Reset generation cycle
Main oscillation clock at 10 MHz: 105 ms (Min)
The sub-CR clock can be used as the source clock of the hardware watchdog timer.
Wild register
It can be used to replace 3 bytes of data.
LIN-UART
A wide range of communication speed can be selected by a dedicated reload timer.
It has a full duplex double buffer.
Clock-synchronized serial data transfer and clock-asynchronized serial data transfer is en-
abled.
The LIN function can be used as a LIN master or a LIN slave.
8/10-bit A/D
converter
5 channels
8-bit or 10-bit resolution can be selected.
8/16-bit
composite timer
1 channel
The timer can be configured as an "8-bit timer
× 2 channels" or a "16-bit timer × 1 channel".
It has built-in timer function, PWC function, PWM function and input capture function.
Count clock: it can be selected from internal clocks (seven types) and external clocks.
It can output square wave.
External
interrupt
6 channels
Interrupt by edge detection (The rising edge, falling edge, or both edges can be selected.)
It can be used to wake up the device from standby modes.
On-chip debug
1-wire serial control
It supports serial writing (asynchronous mode).
相關PDF資料
PDF描述
MB95F563HWQN-G-JNERE1 MICROCONTROLLER, PQCC32
MB95F563KPFT-G-JNE2 MICROCONTROLLER, PDSO20
MB95F573KPF-G-JNE2 MICROCONTROLLER, PDSO8
MB95F582HPFT-G-JNE2 MICROCONTROLLER, PDSO16
MB95F584HWQN-G-JNE1 MICROCONTROLLER, PQCC32
相關代理商/技術參數
參數描述
MB95F563HWQN-G-JNERE1 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:8-bit Microcontrollers
MB95F564KPF-G-JNE2 功能描述:IC MCU 8BIT 20KB FLASH 20TSSOP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:8FX MB95560H 標準包裝:60 系列:PSOC® 3 CY8C38xx 核心處理器:8051 芯體尺寸:8-位 速度:67MHz 連通性:EBI/EMI,I²C,LIN,SPI,UART/USART 外圍設備:電容感應,DMA,LCD,POR,PWM,WDT 輸入/輸出數:25 程序存儲器容量:64KB(64K x 8) 程序存儲器類型:閃存 EEPROM 大小:2K x 8 RAM 容量:8K x 8 電壓 - 電源 (Vcc/Vdd):1.71 V ~ 5.5 V 數據轉換器:A/D 2x20b,D/A 4x8b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:48-VFQFN 裸露焊盤 包裝:托盤
MB95F636HP-ES-SH-SNE2 制造商:FUJITSU 功能描述:8-bit MCU
MB95F636HPMC-ES-SNE2 制造商:FUJITSU 功能描述:8-bit FX series microcontroller
MB95F636HWQN-ES-SNE1 制造商:FUJITSU 功能描述:8-bit MCU