參數資料
型號： MB96F356YWBPMC-GSE2
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 56 MHz, RISC MICROCONTROLLER, PQFP64
封裝： 12 X 12 MM, 1.70 MM HEIGHT, 0.65 MM PITCH, PLASTIC, LFQFP-64
文件頁數： 69/114頁
文件大小： 1306K
代理商： MB96F356YWBPMC-GSE2
PRELIMINARY
MB96350 Series
FME-MB96350 rev 5
58
2008-2-4
*1: AVCC and VCC must be set to the same voltage. It is required that AVCC does not exceed VCC and that the voltage
at the analog inputs does not exceed AVCC neither when the power is switched on.
*2: VI and VO should not exceed VCC + 0.3 V. VI should also not exceed the specied ratings. However if the
maximum current to/from a input is limited by some means with external components, the ICLAMP rating super-
sedes the VI rating. Input/output voltages of standard ports depend on VCC.
*3:
Applicable to all general purpose I/O pins (Pnn_m)
Use within recommended operating conditions.
Use at DC voltage (current)
The +B signal should always be applied a limiting resistance placed between the +B signal and the
microcontroller.
The value of the limiting resistance should be set so that when the +B signal is applied the input current to
the microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods.
Note that when the microcontroller drive current is low, such as in the power saving modes, the +B input
potential may pass through the protective diode and increase the potential at the VCC pin, and this may affect
other devices.
Note that if a +B signal is input when the microcontroller power supply is off (not xed at 0 V), the power
supply is provided from the pins, so that incomplete operation may result.
Note that if the +B input is applied during power-on, the power supply is provided from the pins and the resulting
supply voltage may not be sufcient to operate the Power reset (except devices with persistent low voltage
reset in internal vector mode).
Sample recommended circuits:
*4: The maximum permitted power dissipation depends on the ambient temperature, the air ow velocity and the
thermal conductance of the package on the PCB.
The actual power dissipation depends on the customer application and can be calculated as follows:
PD = PIO + PINT
PIO =
∑ (VOL * IOL + VOH * IOH) (IO load power dissipation, sum is performed on all IO ports)
PINT = VCC * (ICC + IA) (internal power dissipation)
ICC is the total core current consumption into VCC as described in the “DC characteristics” and depends on the
selected operation mode and clock frequency and the usage of functions like Flash programming or the clock
modulator.
IA is the analog current consumption into AVCC.
Storage temperature
TSTG
-55
+150
oC
Parameter
Symbol
Rating
Unit
Remarks
Min
Max
P-ch
N-ch
VCC
R
Protective Diode
Limiting
resistance
+B input (0V to 16V)
相關PDF資料
PDF描述
MB96F356RSBPMC1-GSE2 16-BIT, FLASH, 56 MHz, RISC MICROCONTROLLER, PQFP64
MB96F356RWBPMC1-GSE2 16-BIT, FLASH, 56 MHz, RISC MICROCONTROLLER, PQFP64
MB96F356YWAPMC-GSE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP64
MB96F326ASAPMC-GSE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP80
MB96F348HWAPQC-GE2 16-BIT, FLASH, 56 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
MB96F378 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB96F385 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB96F385RSBPMC-GSE2 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB96F385RWBPMC-GSE2 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
MB96F385YSBPMC-GSE2 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16-bit Proprietary Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*