參數資料
型號： MBM29LV017
廠商： Fujitsu Limited
英文描述： Full bridge driver IC
中文描述： 1,600（2米× 8）位
文件頁數： 15/52頁
文件大?。?/td> 600K
代理商： MBM29LV017
15
MBM29LV017
-80/-90/-12
SPA:Sector address to be protected. Set sector address (SA) and (A
10
, A
6
, A
1
, A
0
) = (0, 0, 1, 0).
SD: Sector protection verify data. Output 01H at protected sector addresses and output 00H at unprotected
sector addresses.
*1: This command is valid while Fast Mode.
*2: Addresses from system set to A
0
to A
6
. The other address are “DON’T CARES”.
*3: This command is valid while V
ID
= RESET.
*4: The data “00H” is also acceptable.
Read/Reset Command
The read or reset operation is initiated by writing the Read/Reset command sequence into the command register.
Microprocessor read cycles retrieve array data from the memory. The device remains enabled for reads until the
command register contents are altered.
The devices will automatically power-up in the read/reset state. In this case, a command sequence is not required
to read data. Standard microprocessor read cycles will retrieve array data. This default value ensures that no
spurious alteration of the memory content occurs during the power transition. Refer to the AC Read
Characteristics and Waveforms for the specific timing parameters.(See Figures 5.1 and 5.2.)
Autoselect Command
Flash memories are intended for use in applications where the local CPU alters memory contents. As such,
manufacture and device codes must be accessible while the device resides in the target system. PROM
programmers typically access the signature codes by raising A
9
to a high voltage. However, multiplexing high
voltage onto the address lines is not generally desired system design practice.
The device contains an Autoselect command operation to supplement traditional PROM programming
methodology. The operation is initiated by writing the Autoselect command sequence into the command register.
Following the command write, a read cycle from address XX00H retrieves the manufacture code of 04H. A read
cycle from address X001H returns the device code (MBM29LV017 = C8H). (See Tables 3.1 and 3.2.)
All manufacturer and device codes will exhibit odd parity with the MSB (DQ
7
) defined as the parity bit.
Sector state (protection or unprotection) will be informed address X0002H.
Scanning the sector addresses (A
20
, A
19
, A
18
, A
17
, A
16
) while (A
10
, A
6
, A
1
, A
0
) = (0, 0, 1, 0) will produce a logical
“1” at device output DQ
0
for a protected sector. The programming verification should be perform margin mode
on the protected sector. (See Table 2.)
To terminate the operation, it is necessary to write the Read/Reset command sequence into the register, and
also to write the Autoselect command during the operation, execute it after writing Read/Reset command
sequence.
Table 6 MBM29LV017 Extended Command Definitions
Command
Sequence
Bus
Write
Cycles
Req'd
3
2
2
2
First Bus
Write Cycle
Second Bus
Write Cycle
Third Bus
Write Cycle
Fourth Bus
Read Cycle
Addr
Data
Addr
Data
Addr
Data
Addr
Data
Fast Mode Set
Fast Program *
1
Fast Mode Reset*
1
Query Command *
2
Extended Sector
Protection*
3
XXXH
XXXH
XXXH
XXH
AAH
A0H
90H
98H
XXXH
PA
XXXH
—
55H
PD
F0H *
4
—
XXXH
—
—
—
20H
—
—
—
—
—
—
—
—
—
—
—
4
XXXH
60H
SPA
60H
SPA
40H
SPA
SD
相關PDF資料
PDF描述
MBM29LV017-12 16M (2M X 8) BIT
MBM29LV017-12PBT Circular Connector; No. of Contacts:41; Series:; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:22; Circular Contact Gender:Socket; Circular Shell Style:Jam Nut Receptacle; Insert Arrangement:22-41 RoHS Compliant: No
MBM29LV017-12PBT-SF2 Circular Connector; No. of Contacts:41; Series:; Body Material:Aluminum; Connector Shell Size:22; Circular Contact Gender:Socket; Circular Shell Style:Jam Nut Receptacle; Insert Arrangement:22-41; MIL SPEC:MIL-C-26482 Series I RoHS Compliant: No
MBM29LV017-12PTN Circular Connector; No. of Contacts:41; Series:; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:22; Circular Contact Gender:Socket; Circular Shell Style:Jam Nut Receptacle; Insert Arrangement:22-41 RoHS Compliant: No
MBM29LV017-90PBT-SF2 RP Series - Econoline Unregulated DC-DC Converters; Input Voltage (Vdc): 15V; Output Voltage (Vdc): 24V; Power: 1W; Pot-Core Transformer - separated windings; High 5.2kVDC Isolation in compact size; Optional Continuous Short Circuit Protected; Pin Compatible with RH & RK Series; Approved for Medical Applications; UL and EN Safety Approvals; Efficiency to 82%
相關代理商/技術參數
參數描述
MBM29LV017-12 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M X 8) BIT
MBM29LV017-12PBT 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M X 8) BIT
MBM29LV017-12PBT-SF2 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M X 8) BIT
MBM29LV017-12PTN 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M X 8) BIT
MBM29LV017-12PTR 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:16M (2M X 8) BIT
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*