參數資料
型號： MC68HC705P6AMDW
廠商： MOTOROLA INC
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
封裝： SOIC-28
文件頁數： 75/130頁
文件大小： 1541K
代理商： MC68HC705P6AMDW
Interrupts
Interrupt Types
MC68HC705P6A — Rev. 2.0
Advance Information
MOTOROLA
Interrupts
49
$1FFA and $1FFB. If the port A interrupts are enabled by the MOR, they
generate external interrupts identically to the IRQ/VPP pin.
NOTE:
The internal interrupt latch is cleared nine internal clock cycles after the
interrupt is recognized (immediately after location $1FFA is read).
Therefore, another external interrupt pulse could be latched during the
IRQ service routine.
Another interrupt will be serviced if the IRQ pin is still in a low state when
the RTI in the service routine is executed.
5.3.3.2 Input Capture Interrupt
The input capture interrupt is generated by the 16-bit timer as described
in Section 8. Capture/Compare Timer. The input capture interrupt flag
is located in register TSR and its corresponding enable bit can be found
in register TCR. The I bit in the CCR must be clear for the input capture
interrupt to be enabled. The interrupt service routine address is specified
by the contents of memory locations $1FF8 and $1FF9.
5.3.3.3 Output Compare Interrupt
The output compare interrupt is generated by a 16-bit timer as described
in Section 8. Capture/Compare Timer. The output compare interrupt
flag is located in register TSR and its corresponding enable bit can be
found in register TCR. The I bit in the CCR must be clear for the output
compare interrupt to be enabled. The interrupt service routine address is
specified by the contents of memory locations $1FF8 and $1FF9.
5.3.3.4 Timer Overflow Interrupt
The timer overflow interrupt is generated by the 16-bit timer as described
in Section 8. Capture/Compare Timer. The timer overflow interrupt flag
is located in register TSR and its corresponding enable bit can be found
in register TCR. The I bit in the CCR must be clear for the timer overflow
interrupt to be enabled. This internal interrupt will vector to the interrupt
service routine located at the address specified by the contents of
memory locations $1FF8 and $1FF9.
相關PDF資料
PDF描述
MC68HC705P6AMDWER2 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC705P6ASD 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER
MC68HC705P6AMDWR2 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC705P6ASD 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER
MC68HC705P6ACSD 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER
相關代理商/技術參數
參數描述
MC68HC705P6AMP 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC68HC705P6CDW 制造商:Motorola Inc 功能描述:
MC68HC705P6CP 制造商:Freescale Semiconductor 功能描述: 制造商:Motorola Inc 功能描述:
MC68HC705P6ECDW 制造商:Motorola Inc 功能描述: 制造商:MOTOROLA 功能描述:
MC68HC705SR3CP 功能描述:IC MCU 3.75K 2.1MHZ OTP 40-DIP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:HC05 其它有關文件:STM32F101T8 View All Specifications 特色產品:STM32 32-bit Cortex MCUs 標準包裝:490 系列:STM32 F1 核心處理器:ARM? Cortex?-M3 芯體尺寸:32-位 速度:36MHz 連通性:I²C，IrDA，LIN，SPI，UART/USART 外圍設備:DMA，PDR，POR，PVD，PWM，溫度傳感器，WDT 輸入/輸出數:26 程序存儲器容量:64KB（64K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:10K x 8 電壓 - 電源 (Vcc/Vdd):2 V ~ 3.6 V 數據轉換器:A/D 10x12b 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:36-VFQFN，36-VFQFPN 包裝:托盤 配用:497-10030-ND - STARTER KIT FOR STM32497-8853-ND - BOARD DEMO STM32 UNIV USB-UUSCIKSDKSTM32-PL-ND - KIT IAR KICKSTART STM32 CORTEXM3497-8512-ND - KIT STARTER FOR STM32F10XE MCU497-8505-ND - KIT STARTER FOR STM32F10XE MCU497-8304-ND - KIT STM32 MOTOR DRIVER BLDC497-6438-ND - BOARD EVALUTION FOR STM32 512K497-6289-ND - KIT PERFORMANCE STICK FOR STM32MCBSTM32UME-ND - BOARD EVAL MCBSTM32 + ULINK-MEMCBSTM32U-ND - BOARD EVAL MCBSTM32 + ULINK2更多... 其它名稱:497-9032STM32F101T8U6-ND
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*