參數資料
型號： MCP7940NT-I/MNY
元件分類： 時鐘/數據恢復及定時提取
英文描述： REAL TIME CLOCK, PDSO8
封裝： 2 X 3 MM, 0.75 MM HEIGHT, PLASTIC, TDFN-8
文件頁數： 4/36頁
文件大?。?/td> 551K
代理商： MCP7940NT-I/MNY
MCP7940N
DS25010A-page 12
2011 Microchip Technology Inc.
With bits RS1 and RS0 set to ‘00’, the calibration
function can be expressed as:
Since the calibration is done once per minute (i.e.,
when the internal minute counter is incremented), only
one cycle in sixty of the MFP output waveform is
affected by the calibration setting. Also note that the
duty cycle of the MFP output waveform will not
necessarily be at 50% when the calibration setting is
applied.
With bits RS1 and RS0 set to ‘01’ or ‘10’, the
calibration function can not be expressed in terms of
the input clock period. In the case where the MSB of
the Calibration register is set to ‘0’, the waveform
appearing at the MFP output pin will be “delayed”,
once per minute, by twice the number of input clock
cycles defined in the Calibration register. The MFP
waveform will appear as:
FIGURE 4-1:
RS1 AND RS0 WITH AND WITHOUT CALIBRATION
In the case where the MSB of the Calibration register
is set to ‘1’, the MFP output waveforms that appear
when bits RS1 and RS0 are set to ‘01’ or ‘10’ are not
as responsive to the setting of the Calibration register.
For
example,
when
outputting
the
4.096
kHz
waveform (RS1, RS0 set to ‘01’), the output waveform
is generated using only eight input clock cycles.
Consequently, attempting to subtract more than eight
input clock cycles from this output does not have a
meaningful effect on the resulting waveform. Any
effect on the output will appear as a modification in
both the frequency and duty cycle of the waveform
appearing on the MFP output pin.
B.RS2 BIT SET TO ‘1’
With the RS2 bit set to ‘1’, the following internal timing
signal is output on the MFP pin:
The frequency listed in the table presumes an input
clock source of exactly 32.768 kHz. In terms of the
equivalent number of input clock cycles, the table
becomes:
Unlike
the
method
previously
described,
the
calibration setting is continuously applied and affects
every cycle of the output waveform. This results in the
modulation of the frequency of the output waveform
based upon the setting of the Calibration register.
Using this setting, the calibration function can be
expressed as:
Since the calibration is done every cycle, the frequency
of the output MFP waveform is constant.
Toutput
=
(32768 +/- (2 * CALREG)) Tinput
where:
Toutput
=
clock period of MFP output signal
Tinput
=
clock period of input signal
CALREG
=
decimal value of Calibration
register setting and the sign is
determined by the MSB of
Calibration register.
Delay
RS2
RS1
RS0
Output Signal
1
x
64.0 Hz
RS2
RS1
RS0
Output Signal
1
x
512
Toutput
=
(2 * (256 +/- (2 * CALREG))) Tinput
where:
Toutput
=
clock period of MFP output signal
Tinput
=
clock period of input signal
CALREG
=
decimal value of the Calibration
register setting, and the sign is
determined by the MSB of the
Calibration register.
相關PDF資料
PDF描述
MCP7940N-I/SN REAL TIME CLOCK, PDSO8
MCP7940N-I/MS REAL TIME CLOCK, PDSO8
MCP7940NT-I/ST REAL TIME CLOCK, PDSO8
MCP7940NT-I/SN REAL TIME CLOCK, PDSO8
MCP7940NT-I/MS REAL TIME CLOCK, PDSO8
相關代理商/技術參數
參數描述
MCP79410 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:I2C? Real-Time Clock/Calendar with EEPROM, SRAM, Unique ID and Battery Switchover
MCP79410_13 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:Battery-Backed I2Ca?￠ Real-Time Clock/Calendar with EEPROM and Unique ID
MCP79410-I/MNY 制造商:Microchip Technology Inc 功能描述:I2C GP RTCC, 1KB EE, 64B SRAM, ID - Rail/Tube
MCP79410-I/MS 功能描述:實時時鐘 I2C GP RTCC 1Kb EE 64B SRAM ID RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
MCP79410-I/P 制造商:Microchip Technology Inc 功能描述:I2C GP RTCC, 1KB EE, 64B SRAM, ID - Rail/Tube 制造商:Microchip Technology Inc 功能描述:RTCC 12C 1K EE 64B SRAM 8PDIP
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*