參數資料
型號: MCP79410T-I/MNY
元件分類: 時鐘/數據恢復及定時提取
英文描述: REAL TIME CLOCK, PDSO8
封裝: 2 X 3 MM, 0.75 MM HEIGHT, ROHS COMPLAINT, PLASTIC, TDFN-8
文件頁數: 2/40頁
文件大?。?/td> 584K
代理商: MCP79410T-I/MNY
MCP7941X
DS22266C-page 10
2010-2011 Microchip Technology Inc.
4.0
RTCC FUNCTIONALITY
The MCP7941x family is a highly integrated RTCC. On-
board time and date counters are driven from a low-
power oscillator to maintain the time and date. An
integrated VCC switch enables the device to maintain
the time and date and also the contents of the SRAM
during a VCC power failure.
4.1
RTCC MEMORY MAP
The RTCC registers are contained in addresses
0x00h-0x1fh. 64 bytes of user-accessable SRAM are
located in the address range 0x20-0x5f. The SRAM
memory is a separate block from the RTCC control
and Configuration registers. All SRAM locations are
battery-backed-up during a VCC power fail. Unused
locations are not accessible, MCP7941X will noACK
after the address byte if the address is out of range, as
shown in the shaded region of the memory map in
Addresses 0x00h-0x06h are the RTCC Time and
Date registers. These are read/write registers.
Care must be taken when writing to these regis-
ters with the oscillator running.
Incorrect data can appear in the Time and Date
registers if a write is attempted during the time
frame where these internal registers are being
incremented. The user can minimize the likeli-
hood of data corruption by ensuring that any
writes to the Time and Date registers occur before
the contents of the second register reach a value
of 0x59H.
Addresses 0x07h-0x09h are the device Configu-
ration, Calibration and ID Unlock registers.
Addresses 0x0Ah-0x10h are the Alarm 0 regis-
ters. These are used to set up the Alarm 0, the
Interrupt polarity and the Alarm 0 Compare.
Addresses 0x11h-0x17h are the same as 0x0Bh-
0x11h but are used for Alarm 1.
Addresses 0x18h-0x1Fh are used for the time-
stamp feature.
The detailed memory map is shown in Table 4-1.
The shaded areas are not implemented and read as ‘0’.
No error checking is provided when loading time and
date registers.
FIGURE 4-1:
MEMORY MAP
0x00
0x06
Time and Date
Configuration and Calibration
Alarm 0
Alarm 1
Time-Stamp
SRAM (64 Bytes)
0x07
0x09
0x0A
0x10
0x11
0x17
0x18
0x1F
0x20
0x5F
0x60
0xFF
相關PDF資料
PDF描述
MCP79410T-I/MS REAL TIME CLOCK, PDSO8
MCP79412-I/MS REAL TIME CLOCK, PDSO8
MCP79410-I/MNY REAL TIME CLOCK, PDSO8
MCP79410T-I/ST REAL TIME CLOCK, PDSO8
MCP79412-I/MNY REAL TIME CLOCK, PDSO8
相關代理商/技術參數
參數描述
MCP79411 制造商:MICROCHIP 制造商全稱:Microchip Technology 功能描述:I2C? Real-Time Clock/Calendar with EEPROM, SRAM, Unique ID and Battery Switchover
MCP79411-I/MS 功能描述:實時時鐘 I2C GP RTCC 1Kb EE 64B SRAM EUI-48 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
MCP79411-I/SN 功能描述:實時時鐘 I2C GP RTCC 1Kb EE 64B SRAM EUI-48 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
MCP79411-I/ST 功能描述:實時時鐘 I2C GP RTCC 1Kb EE 64B SRAM EUI-48 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
MCP79411T-I/MNY 功能描述:實時時鐘 I2C GP RTCC 1Kb EE 64B SRAM EUI-48 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube