參數資料
型號: MDEV-LICAL-MT
廠商: Linx Technologies Inc
文件頁數: 20/44頁
文件大?。?/td> 0K
描述: KIT MASTER DEV MT SERIES
軟件下載: MT Series Master Dev Software
標準包裝: 1
系列: MT
類型: 代碼轉換器
適用于相關產品: MT 系列代碼轉換器
已供物品: 2 個板,4 個代碼轉換器,2 根天線
23
Serial Interface Command Set Definitions
There are ten functions using the Serial Interface Engine (SIE). Each
function has the ability to read the current setting from the MT or write new
information to the specified configuration setting.
Serial Interface Command Set Definitions
Command
Description
Local Settings
Reads and writes the device’s local 24-bit address and
status line configuration. This allows the option to pro-
gram all devices with the same address and status line
configuration, or increment the address to utilize the full
range of addresses.
Next User ID
Reads and writes the next available ID location, which
will be given to the next user manually learned into the
system.
Specific User
Reads and writes the 24-bit address and status line
configuration for a specific user learned into the system.
If a device in the system is lost or stolen, that specific
device can be removed from the system and replaced
with a new one without having to erase the memory and
re-learn all of the other devices in the system. To remove
an existing user, write 0xFF into the address and status
line values. 0xFF should not be used as a learned user.
Target Address
Reads and writes the local device’s 24-bit target address.
This allows a user to communicate directly with a speci-
fied target device and not with any other devices even
though they may have been authorized for communica-
tion.
Custom Data Value
Reads and writes a single byte that is sent when Custom
Data is enabled. If enabled, the byte will be sent with
each packet, and then output on the SER_IO line of the
receiving device along with the TX ID value and the status
line value.
Latch Mask
Reads and writes the Latch Mask for the status line
outputs. This allows each status line to be individually set
as momentary or latched.
Status Value
Reads the current state of the transcoder’s status line
outputs. Writes the value of the status line inputs to be
sent (subject to I/O mask) and the number of packets to
send.
Confirmation EN
Reads and writes the device’s confirmation enable
setting. When enabled, the receiving transcoder will
immediately transmit a confirmation packet back to the
originating transcoder. The originating transcoder will
validate the confirmation and then activate its CONFIRM
line. If the confirmation is not necessary or the user wants
to free the air of additional transmissions, confirmation
can be disabled and the receiving device will not transmit
a confirmation packet.
Targeting EN
Reads and writes the device’s target enable setting. This
enables or disables the option for the transcoder to send
a targeted data packet.
Custom Data EN
Reads and writes the transcoder’s custom data setting.
This enables or disables the option for the transcoder to
send a custom data byte with each transmission.
Figure 18: Serial Interface Command Set Definitions
相關PDF資料
PDF描述
CR8449-1000 TRANSFORMER CURRENT GENERAL PURP
CR8349-2000-D TRANSFORMER CURRENT DC IMMUNE
UPC2709TB-A IC MMIC AMP 2.5GHZ SOT 363
UPC2748TB-A IC MMIC AMP 900MHZ SOT-363
TP-A DMM ACCESSORY
相關代理商/技術參數
參數描述
MDEV-USB-QS 功能描述:界面開發工具 QS Master Dev Sys RoHS:否 制造商:Bourns 產品:Evaluation Boards 類型:RS-485 工具用于評估:ADM3485E 接口類型:RS-485 工作電源電壓:3.3 V
MDF005 制造商:MIC 制造商全稱:MIC GROUP RECTIFIERS 功能描述:SURFACE MOUNT BRIDGE
MDF01 制造商:MIC 制造商全稱:MIC GROUP RECTIFIERS 功能描述:SURFACE MOUNT BRIDGE
MDF02 制造商:MIC 制造商全稱:MIC GROUP RECTIFIERS 功能描述:SURFACE MOUNT BRIDGE
MDF-023 制造商:Power Dynamics Inc 功能描述: