參數資料
型號： MF0128M-04BAxx
廠商： Mitsubishi Electric Corporation
英文描述： 8/16-bit Data Bus CompactFlash Card
中文描述： 16位產品數據總線CF卡
文件頁數： 19/32頁
文件大?。?/td> 211K
代理商： MF0128M-04BAXX
MITSUBISHI STORAGE CARD
Preliminary
CompactFlash CARDS
MITSUBISHI
ELECTRIC
19 Oct.
1999. Rev. 0.2
Standby(96h, E2h)
This command causes the card to set BSY, enter the
Standby mode, clear BSY and generate an interrupt.
Standby Immediate(94h, E0h)
This command causes the card to set BSY, enter the
Standby mode, clear BSY and generate an interrupt.
Translate Sector(87h)
This command allows the host to know the number
of times an user sector has been erased and
programmed. This card doesn't support the Hot
Count value.
Wear Leveling(F5h)
Although this command is supported for backward
compatibility, it has no actual function. The card will
always return good status at the completion of this
command.
Write Buffer(E8h)
This command enables the host to overwrite contents of the
card’s sector buffer with any data pattern desired. This
command has the same protocol as the Write Sector(s)
command and transfers 512 bytes.
Write Long Sector(32h, 33h)
This command is similar to the Write Sector(s) except the
contents of the Sector Count register are ignored and only
one sector is written. The 512 data bytes and 4 ECC bytes
are transferred from the host and then written from the
buffer to the flash.
Write Multiple(C5h)
This command is similar to the Write Sector(s) command.
Interrupts are not presented on each sector, but on the
transfer of a block which contains the number of sectors
defined by Set Multiple command.
Write Multiple without Erase(CDh)
This command is similar to the Write Multiple command.
The sectors should be pre-erased with the Erase Sector
command before this command is issued. If the sector is
not pre-erased, Write Multiple command operation will
occur.
Write Sector(s)(30h, 31h)
This command transfers data from the host to the card.
Data transfer starts at the sector specified by the Cylinder,
Head, and Sector Number registers, and proceeds for the
number of sectors specified in the Sector Count register.
Write Sector without Erase(CDh)
This command is similar to the Write Sector(s) command.
The sectors should be pre-erased with the Erase Sector
command before this command is issued. If the sector is
not pre-erased, Write Sector command operation will
occur.
Write Verify(3Ch)
This command is similar to the Write Sector(s) command,
except each sector is verified immediately after being
written.
相關PDF資料
PDF描述
MF0032M-11ATXX 8/16-bit Data Bus Flash ATA PC Card
MF0064M-11ATxx 8/16-bit Data Bus Flash ATA PC Card
MF0128M-11ATxx 8/16-bit Data Bus Flash ATA PC Card
MF0192M-11ATxx 8/16-bit Data Bus Flash ATA PC Card
MF0256M-11ATxx 8/16-bit Data Bus Flash ATA PC Card
相關代理商/技術參數
參數描述
MF0128M-05AAXX 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8/16-bit Data Bus CompactFlash Card
MF0128M-07ATXX 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8/16-bit Data Bus Flash ATA PC Card
MF0128M-07BTXX 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8/16-bit Data Bus Flash ATA PC Card
MF0128M-11ATXX 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:8/16-bit Data Bus Flash ATA PC Card
MF01320A 制造商:SMC Corporation of America 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*