- 您現在的位置：買賣IC網 > PDF目錄182245 > MIC2077-2YWMTR (MICREL INC) 4-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 PDF資料下載
參數資料
| 型號： | MIC2077-2YWMTR |
| 廠商： | MICREL INC |
| 元件分類： | 電源管理 |
| 英文描述： | 4-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO16 |
| 封裝： | 0.300 INCH, LEAD FREE, SOIC-16 |
| 文件頁數： | 7/17頁 |
| 文件大?。?/td> | 1388K |
| 代理商： | MIC2077-2YWMTR |
Micrel, Inc.
MIC2027/2077
September 2006
15
M9999-091506
Application Information
Supply Filtering
A 0.1F to 1F bypass capacitor positioned close to VIN
and GND of the device is strongly recommended to
control supply transients. Without a bypass capacitor, an
output short may cause sufficient ringing on the input
(from supply lead inductance) to damage internal control
circuitry.
Printed Circuit Board Hot-Plug
The MIC2027/77 are ideal inrush current-limiters for hot-
plug applications. Due to the integrated charge pump,
the MIC2027/77 present a high impedance when off and
slowly becomes a low impedance as it turns on. This
“soft-start” feature effectively isolates power supplies
from highly capacitive loads by reducing inrush current.
In cases of extremely large capacitive loads (>400F),
the length of the transient due to inrush current may
exceed the delay provided by the integrated filter. Since
this inrush current exceeds the current-limit flag delay
specification, FLG will be asserted during this time. To
prevent the logic controller from responding to FLG
being asserted, an external RC filter, as shown in Figure
3, can be used to filter out transient FLG assertion. The
value of the RC time constant should be selected to
match the length of the transient, less tD(min) of the
MIC2027/77.
Universal Serial Bus (USB) Power Distribution
The MIC2027/77 is ideally suited for USB (Universal
Serial Bus) power distribution applications. The USB
specification defines power distribution for USB host
systems such as PCs and USB hubs. Hubs can either
be self-powered or bus-powered (that is, powered from
the bus). The requirement for USB self-powered hubs is
that the port must supply a minimum of 500mA at an
output voltage of 5V ±5%. In addition, the output power
delivered must be limited to below 25VA. Upon an
overcurrent condition, the host must also be notified. To
support hot-plug events, the hub must have a minimum
of 120F of bulk capacitance, preferably low ESR
electrolytic or tantulum. Please refer to Application Note
17 for more details on designing compliant USB hub and
host systems.
Figure 3. Transient Filter
相關PDF資料 |
PDF描述 |
|---|---|
| MIC2179-5.0YSMTR | 5.5 A SWITCHING REGULATOR, 240 kHz SWITCHING FREQ-MAX, PDSO20 |
| MIC2219-PSBML | Dynamically Adjustable Dual uCap LDO |
| MIC2219-PSYML | Dynamically Adjustable Dual uCap LDO |
| MIC2219-PSBMLTR | DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO10 |
| MIC2219-PSYMLTR | DUAL OUTPUT, FIXED POSITIVE LDO REGULATOR, PDSO10 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MIC2085 | 制造商:MICREL 制造商全稱:Micrel Semiconductor 功能描述:Single Channel Hot Swap Controllers |
| MIC2085JBQS | 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:RF Micro Devices Inc 功能描述: 制造商:Micrel Inc 功能描述: |
| MIC2085-JBQS | 功能描述:IC CTRLR HOW SWAP SGL 16-QSOP RoHS:否 類別:集成電路 (IC) >> PMIC - 熱交換 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:100 系列:- 類型:熱插拔開關 應用:通用 內部開關:是 電流限制:可調 電源電壓:9 V ~ 13.2 V 工作溫度:-40°C ~ 150°C 安裝類型:表面貼裝 封裝/外殼:10-WFDFN 裸露焊盤 供應商設備封裝:10-TDFN-EP（3x3） 包裝:管件 |
| MIC2085-JYQS | 功能描述:熱插拔功率分布 Single-channel Low Voltage Hot Swap Controller, VFAST = 100 mV, QSOP 16 (Lead-Free) RoHS:否 制造商:Texas Instruments 產品:Controllers & Switches 電流限制: 電源電壓-最大:7 V 電源電壓-最小:- 0.3 V 工作溫度范圍: 功率耗散: 安裝風格:SMD/SMT 封裝 / 箱體:MSOP-8 封裝:Tube |
| MIC2085-JYQS TR | 功能描述:熱插拔功率分布 Single-channel Low Voltage Hot Swap Controller, VFAST = 100 mV, QSOP 16 (Lead-Free) RoHS:否 制造商:Texas Instruments 產品:Controllers & Switches 電流限制: 電源電壓-最大:7 V 電源電壓-最小:- 0.3 V 工作溫度范圍: 功率耗散: 安裝風格:SMD/SMT 封裝 / 箱體:MSOP-8 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。