參數資料
型號： ML9040A
廠商： OKI SEMICONDUCTOR CO., LTD.
英文描述： DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER(16X40點陣LCD驅動器)
中文描述： 點陣LCD控制器，16點通用驅動程序和40個點段驅動（16X40點陣液晶驅動器）
文件頁數： 29/49頁
文件大?。?/td> 515K
代理商： ML9040A
ML9040A-Axx/-Bxx
Semiconductor
29/49
PEDL9040A-03
L
R/W
Instruction code
L
RS
L
DB
7
L
DB
6
L
DB
5
L
DB
4
L
DB
3
H
DB
2
I/D
DB
1
SH
DB
0
(3)Entry mode setting
1
When the I/D is set, the 8-bit character code is written or read to and from the DD
RAM, the cursor and blink shift to the right by 1 character position (I/D = "H";
increment) or to the left by 1 character position (I/D = "L"; decrement).
The address counter is incremented (I/D = "H") or decremented (I/D = "L") by 1 at
this time. Even after the character pattern code is written or read to and from the
CG RAM, the address counter (ADC) is incremented (I/D = "H") or decremented
(I/D = "L") by 1.
2
When SH = "H" is set, the character code is written to the DD RAM. Then the cursor
and blink stop and the entire display shifts to the left (I/D = "H") or to the right (I/
D = "L") by 1 character position.
When the character is read from the DD RAM during SH = "H", or when the
character pattern data is written or read to or from the CG RAM during SH = "H",
the entire display does not shift, but normal write/read is performed (the entire
display does not shift, but the cursor and blink shift to the right (I/D = "H") or to the
left (I/D = "L") by 1 character position.
When SH = "L" is set, the display does not shift, but normal write/read is performed.
The execution time when the OSC oscillation frequency is 270 kHz is 37
m
s.
(4)Display mode setting
L
R/W
Instruction code
L
RS
L
DB
7
L
DB
6
L
DB
5
L
DB
4
H
DB
3
DI
DB
2
C
DB
1
B
DB
0
1
The DI bit controls whether the character pattern is displayed or not displayed.
When DI is "H", this bit makes the LCD display the character pattern.
When DI is "L", the LCD character pattern is not displayed. The cursor and blink
are also cancelled at this time.
(Note) Unlike the display clear, the character code is not rewritten at all.
2
The cursor is not displayed when C = "L" and is displayed when DI = "H" and C =
"H".
3
The blink is cancelled when B = "L" and is executed when DI = "H" and B = "H".
In the blink mode, all dots (including the cursor) and displaying character pattern
and cursor are displayed alternately at 379.2 ms (in 5 x 7 dots character font) or 521.5
ms (in 5 x 10 dots character font) when the OSC oscillation frequency is 270 kHz. The
execution time when the OSC oscillation frequency is 270 kHz is 37
m
s.
相關PDF資料
PDF描述
ML9040 DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-Axx DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040-Bxx DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9041 DOT MATRIX LCD CONTROLLER DRIVER
ML9042 DOT MATRIX LCD CONTROLLER DRIVER
相關代理商/技術參數
參數描述
ML9040A-A01GAZ03A-7 功能描述:LCD 驅動器 LCD DOT Matrix Controller, 16/40 RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
ML9040A-A01GAZ0A-ML 制造商:ROHM Semiconductor 功能描述:
ML9040A-AXX 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
ML9040A-B01GAZ03A-7 功能描述:LCD 驅動器 LCD DOT Matrix Controller, 16/40 RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
ML9040A-BXX 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*