參數資料
型號： ML9044A-51BCVWA
廠商： OKI ELECTRIC INDUSTRY CO LTD
元件分類： 顯示控制器
英文描述： 17 X 120 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC175
封裝： GOLD BUMP, DIE-175
文件頁數： 11/64頁
文件大小： 696K
代理商： ML9044A-51BCVWA
PEDL9044A-04
OKI Semiconductor
ML9044A-xxA/xxB
19/64
Character Generator RAM (CGRAM)
The CGRAM is used to generate user-specific character patterns that are not in the CGROM. CGRAM (64 bytes =
512 bits) can store up to 8 small character patterns (5
× 8 dots) or up to 4 large character patterns (5 × 11 dots).
When displaying a character pattern stored in the CGRAM, write an 8-bit character code (00 to 07 or 08 to 0F;
hex.) assigned in Table 2 to the DDRAM. This enables outputting the character pattern to the LCD display
position corresponding to the DDRAM address.
The cursor or blink is also displayed even when a CGRAM or ABRAM address is set in the ADC. Therefore, the
cursor or blink display should be inhibited while the ADC is holding a CGRAM or ABRAM address.
The following describes how character patterns are written in and read from the CGRAM.
1) Small character patterns (5
× 8 dots) (See Table 3-1.)
(1)
A method of writing character patterns to the CGRAM from the CPU
The three CGRAM address bit weights 0 to 2 select one of the lines constituting a character pattern.
First, set the mode to increment or decrement from the CPU, and then input the CGRAM address.
Write each line of the character pattern in the CGRAM through DB0 to DB7.
The data lines DB0 to DB7 correspond to the CGRAM data bit weights 0 to 7, respectively (see Table 3-
1). Input data “1” represents the ON status of an LCD dot and “0” represents the OFF status. Since the
ADC is automatically incremented or decremented by 1 after the data is written to the CGRAM, it is not
necessary to set the CGRAM address again.
The bottom line of a character pattern (the CGRAM address bit weights 0 to 2 are all “1”, which means 7
in hexadecimal) is the cursor line. The ON/OFF pattern of this line is ORed with the cursor pattern for
displaying on the LCD. Therefore, the pattern data for the cursor position should be all zeros to display
the cursor.
Whereas the data given by the CGRAM data bit weights 0 to 4 is output to the LCD as display data, the
data given by the CGRAM data bit weights 5 to 7 is not. Therefore, the CGRAM data bit weights 5 to 7
can be used as a RAM area.
(2)
A method of displaying CGRAM character patterns on the LCD
The CGRAM is selected when the higher-order 4 bits of a character code are all zeros. Since bit weight 3
of a character code is not used, the character pattern “0” in Table 3-1 can be selected using the character
code “00” or “08” in hexadecimal.
When the 8-bit character code corresponding to a character pattern in the CGRAM is written to the
DDRAM, the character pattern is displayed in the display position specified by the DDRAM address.
(The DDRAM data bit weights 0 to 2 correspond to the CGRAM address bit weights 3 to 5, respectively.)
相關PDF資料
PDF描述
ML9204-XXGA 24 X 35 DOTS FLUORESCENT DSPL CTRL, PQFP128
ML9207-XXGP 24 X 36 DOTS FLUORESCENT DSPL CTRL, PQFP80
ML9208-01MB 16 X 35 DOTS DOT MAT LCD DRVR AND DSPL CTLR, PDSO64
ML9208-01GA 16 X 35 DOTS DOT MAT LCD DRVR AND DSPL CTLR, PQFP64
MLX90314AALLW MICROCONTROLLER, PDSO16
相關代理商/技術參數
參數描述
ML9044A-XXACVWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML9044A-XXBCVWA 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER
ML-90-4-5 功能描述:KNOB BLK MATTE.925"DIA.250"SHAFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
ML-90-4-6 功能描述:KNOB BLK MATTE.925"DIA.125"SHAFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
ML-90-4-6MM 功能描述:KNOB BLK MATTE.925"DIA 6MM SHFT RoHS:是 類別:硬件，緊固件，配件 >> 旋鈕 系列:ML 標準包裝:1 系列:- 樣式:圓柱形 類型:開槽 軸尺寸:0.250"（6.35mm） 直徑:1.031"（26.19mm） 高度:0.688"（17.48mm） 指示燈:無指示燈 材質:塑料 顏色:黑 特點:8-32 號固定螺絲
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*