2
Motorola Sensor Device Data
MAXIMUM RATINGS(1)
Parametrics
Symbol
Value
Unit
Overpressure(9) (P1 > P2)
Burst Pressure(9) (P1 > P2)
Pmax
Pburst
Tstg
TA
75
kPa
100
kPa
Storage Temperature
–40 to +125
°
C
Operating Temperature
1. TC = 25
°
C unless otherwise noted.
2. Exposure beyond the specified limits may cause permanent damage or degradation to the device.
–40 to +125
°
C
OPERATING CHARACTERISTICS
(VS = 10 Vdc, TA = 25
°
C unless otherwise noted, P1 > P2)
Characteristic
Pressure Range(1)
Supply Voltage(2)
Symbol
Min
Typ
Max
Unit
POP
VS
Io
Voff
VFSS
V/P
0
—
10
kPa
—
10
16
Vdc
Supply Current
Offset(3)
Full Scale Span(4)
—
6.0
—
mAdc
–1.0
—
+1.0
mV
24
25
26
mV
Sensitivity
Linearity(5)
Pressure Hysteresis(5) (0 to 10 kPa)
Temperature Hysteresis(5) (–40
°
C to +125
°
C)
Temperature Effect on Offset(5)
Temperature Effect on Full Scale Span(5)
—
2.5
—
mV/kPa
—
–1.0
—
+1.0
%VFSS
%VFSS
%VFSS
mV
—
—
±
0.1
—
—
—
±
0.5
—
TCVoff
TCVFSS
Zin
Zout
tR
—
–1.0
—
+1.0
–1.0
—
+1.0
%VFSS
Input Impedance
1300
—
2550
Output Impedance
Response Time(6) (10% to 90%)
Warm–up Time(7)
Offset Stability(8)
1400
—
3000
—
1.0
—
ms
—
20
—
ms
—
—
±
0.5
—
%VFSS
MECHANICAL CHARACTERISTICS
Characteristic
Symbol
Min
Typ
Max
Unit
Weight, Basic Element
—
—
2.0
—
Grams
NOTES:
1. 1.0 kPa (kiloPascal) equals 0.145 psi.
2. Device is ratiometric within this specified excitation range. Operating the device above the specified excitation range may induce additional
error due to device self–heating.
3. Offset (Voff) is defined as the output voltage at the minimum rated pressure.
4. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
minimum rated pressure.
5. Accuracy (error budget) consists of the following:
Linearity:
Output deviation from a straight line relationship with pressure over the specified pressure range.
Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is
cycled to and from the minimum or maximum operating temperature points, with zero differential pressure
applied.
Pressure Hysteresis:
Output deviation at any pressure within the specified range, when this pressure is cycled to and from the
minimum or maximum rated pressure, at 25
°
C.
TcSpan:
Output deviation over the temperature range of 0 to 85
°
C, relative to 25
°
C.
TcOffset:
Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85
°
C, relative to
25
°
C.
Variation from Nominal:
The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25
°
C.
6. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to
a specified step change in pressure.
7. Warm–up is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
8. Offset stability is the product’s output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
9. Exposure beyond these limits may cause permanent damage or degradation to the device.