- 您現在的位置：買賣IC網 > PDF目錄378010 > MSM51V4222C-30JA (OKI SEMICONDUCTOR CO., LTD.) 262,263-Word 】 4-Bit Field Memory PDF資料下載
參數資料
| 型號： | MSM51V4222C-30JA |
| 廠商： | OKI SEMICONDUCTOR CO., LTD. |
| 英文描述： | 262,263-Word 】 4-Bit Field Memory |
| 中文描述： | 262263詞】4位場記憶 |
| 文件頁數： | 7/16頁 |
| 文件大?。?/td> | 238K |
| 代理商： | MSM51V4222C-30JA |
FEDS51V4222C-03
1
Semiconductor
MSM51V4222C
7/16
Power-up and Initialization
On power-up, the device is designed to begin proper operation after at least 100
μ
s after V
CC
has stabilized to a
value within the range of recommended operating conditions. After this 100
μ
s stabilization interval, the following
initialization sequence must be performed.
Because the read and write address counters are not valid after power-up, a minimum of 130 dummy write
operations (SWCK cycles) and read operations (SRCK cycles) must be performed, followed by an RSTW
operation and an RSTR operation, to properly initialize the write and the read address pointer. Dummy write
cycles/RSTW and dummy read cycles/RSTR may occur simultaneously.
If these dummy read and write operations start while V
CC
and/or the substrate voltage has not stabilized, it is
necessary to perform an RSTR operation plus a minimum of 130 SRCK cycles plus another RSTR operation, and
an RSTW operation plus a minimum of 130 SRCK cycles plus another RSTW operation to properly initialize read
and write address pointers
Old/New Data Access
There must be a minimum delay of 600 SWCK cycles between writing into memory and reading out from memory.
If reading from the first field starts with an RSTR operation, before the start of writing the second field (before the
next RSTW operation), then the data just written will be read out.
The start of reading out the first field of data may be delayed past the beginning of writing in the second field of
data for as many as 119 SWCK cycles. If the RSTR operation for the first field read-out occurs less than 119
SWCK cycles after the RSTW operation for the second field write-in, then the internal buffering of the device
assures that the first field will still be read out. The first field of data that is read out while the second field of data
is written is called “old data”.
In order to read out “new data”, i.e., the second field written in, the delay between an RSTW operation and an
RSTR operation must be at least 600 SRCK cycles. If the delay between RSTW and RSTR operations is more than
120 but less than 600 cycles, then the data read out will be undetermined. It may be “old data” or “new” data, or a
combination of old and new data. Such a timing should be avoided.
Cascade Operation
The MSM51V4222C is designed to allow easy cascading of multiple memory devices. This provides higher
storage depth, or a longer delay than can be achieved with only one memory device.
相關PDF資料 |
PDF描述 |
|---|---|
| MSM51V4222C-30RA | 262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-30RD | 262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-40JA | 262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-40RA | 262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-40RD | 262,263-Word 】 4-Bit Field Memory |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MSM51V4222C-30RA | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-30RD | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-40JA | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-40RA | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:262,263-Word 】 4-Bit Field Memory |
| MSM51V4222C-40RD | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:262,263-Word 】 4-Bit Field Memory |
發(fā)布緊急采購，3分鐘左右您將得到回復。