- 您現在的位置：買賣IC網 > PDF目錄45391 > MSM6782-01RS (OKI ELECTRIC INDUSTRY CO LTD) 0 TIMER(S), REAL TIME CLOCK, PDIP8 PDF資料下載
參數資料
| 型號： | MSM6782-01RS |
| 廠商： | OKI ELECTRIC INDUSTRY CO LTD |
| 元件分類： | 時鐘/數據恢復及定時提取 |
| 英文描述： | 0 TIMER(S), REAL TIME CLOCK, PDIP8 |
| 封裝： | 0.300 INCH, PLASTIC, DIP-8 |
| 文件頁數： | 11/17頁 |
| 文件大?。?/td> | 116K |
| 代理商： | MSM6782-01RS |
122
Semiconductor
MSM6782-01
PIN DESCRIPTION
STD.P (Pin No. 1)
Periodic output of N-CH OPEN DRAIN type or interrupt signal output of N-CH OPEN
DRAIN type for the CPU. The periodic output is used to check the reference signal and
oscillation frequency.
This pin is set as periodic output or interrupt signal output by writing “1” or “0” to the INT/
STND bit.
This output is not inhibited by CE. For more information, see “FUNCTIONAL DESCRIP-
TION OF REGISTERS”.
DATA I/O (Pin No.2)
Input/output pin for setting of WRITE mode or READ mode, writing of addresses, or
writing/reading of data.
This pin is used as an input or output pin in high impedance state depending on whether
WRITE mode or READ mode is selected in the first 8-bit data cycle after the rising of the CE
input pulse.
CLK (Pin No. 3)
Shift clock input pin. Data is taken in on the rising edge of a shift clock pulse when in WRITE
mode and data is output when in READ mode.
CE (Pin No. 4)
Chip enable input pin. “H” level on this pin means “enable”.
When this pin is low, the DATA I/O pin goes into high impedance state, and DATA I/O and
CLK are disabled inside the LSI and current stops flowing through those pins.
“L” level on this pin forces the TEST and REST bits of the CF registers and the fr flag to be set
to “0”.
When turning the power ON, set this pin to “L” level.
XT, XT (Pin Nos. 7 and 6)
32.768kHz crystal is to be connected to these pins.
XT
MSM6782-01
XT
VDD
C1
C2
When an external clock is used, it is to be input from XT, while XT should be left open.
The oscillation crystal and capacitors should be placed as close to the IC as possible.
The oscillation circuit and other signal lines on any side of the LSI should be distant from each
other.
VDD, VSS (Pin No.5)
Power supply pins. VDD is used for positive supply and VSS is for negative supply.
相關PDF資料 |
PDF描述 |
|---|---|
| MSM6782-01RS | 0 TIMER(S), REAL TIME CLOCK, PDIP8 |
| MSM67X640-GS-VIK | 16-BIT, 10 MHz, MICROCONTROLLER, PQFP80 |
| MSM699215GS | 32-BIT, OTHER DSP, PQFP100 |
| MSM699215JS | 32-BIT, OTHER DSP, PQCC84 |
| MSM77C20AJS | 8-BIT, OTHER DSP, PQCC44 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MSM6786 | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:1/3, 1/4 DUTY LCD DRIVER WITH 4-DOT COMMON DRIVER AND 29-DOT SEGMENT DRIVER |
| MSM6786G3-2K | 制造商:ROHM Semiconductor 功能描述: |
| MSM6789 | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:SBC Solid-State Recorder IC |
| MSM6789A | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:SBC Solid-State Recorder IC |
| MSM6789L | 制造商:OKI 制造商全稱:OKI electronic componets 功能描述:SBC Solid-State Recorder IC |
發布緊急采購，3分鐘左右您將得到回復。