- 您現在的位置：買賣IC網 > PDF目錄376224 > MXR7210M (Electronic Theatre Controls, Inc.) Low Cost, Low Noise 【10 g Dual Axis Accelerometer with Ratiometric Analog Outputs PDF資料下載
參數資料
| 型號： | MXR7210M |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | Low Cost, Low Noise 【10 g Dual Axis Accelerometer with Ratiometric Analog Outputs |
| 中文描述： | 低成本，低噪聲【10克雙軸加速度計成比例模擬輸出 |
| 文件頁數： | 5/8頁 |
| 文件大?。?/td> | 108K |
| 代理商： | MXR7210M |
EXTERNAL FILTERS
AC Coupling
: For applications where only dynamic
accelerations (vibration) are to be measured, it is
recommended to ac couple the accelerometer output as
shown in Figure 3. The advantage of ac coupling is that
zero
g
offset variations from part to part and zero
g
offset
change over temperature can be eliminated. Figure 2 is a
HFP (high pass filter) with a –3dB breakpoint given by the
equation:
RC
π
2
desirable to have the HFP –3dB point at a very low
frequency in order to detect very low frequency
accelerations. Sometimes the implementation of this HFP
may result in unreasonably large capacitors, and the
designer may turn to digital implementations of HFPs
where very low frequency –3dB breakpoints can be
achieved.
MEMSIC MXR7210G/M
Rev.F
Page 5 of 8
3/24/2005
f
1
=
. In many applications it may be
A
OUTX
R
C
A
OUTY
R
C
A
OUTX
Filtered
Output
A
OUTY
Filtered
Output
Figure 2: High Pass Filter
Low Pass Filter
: An external low pass filter would be
useful in low frequency applications such as tilt or
inclination. The low pass filter limits the noise floor and
improves the resolution of the accelerometer
.
The low pass
filter shown in Figure 3 has a –3dB breakpoint given by the
equation:
RC
π
2
device filter, C=0.1
μ
F and R=8k
,
±
5%, 1/8W.
f
1
=
. For the 200 Hz ratiometric output
A
OUTX
R
C
A
OUTY
R
C
A
OUTX
Filtered
Output
A
OUTY
Filtered
Output
Figure 3: Low Pass Filter
POWER SUPPLY NOISE REJECTION
One capacitor is recommended for best rejection of power
supply noise (reference Figure 4 below). The capacitor
should be located as close as possible to the device supply
pin (V
DD
). The capacitor lead length should be as short as
possible, and surface mount capacitor is preferred. For
typical applications, the capacitor can be ceramic 0.1 μF.
Figure 4: Power Supply Noise Rejection
PCB LAYOUT AND FABRICATION SUGGESTIONS
1. Liberal use of ceramic bypass capacitors is
recommended. It is best to solder a 0.1uF capacitor
directly across V
DD
and COM pin.
2. Robust low inductance ground wiring should be used.
3. Care should be taken to ensure there is “thermal
symmetry” on the PCB immediately surrounding the
MEMSIC device and that there is no significant heat
source nearby.
4. A metal ground plane should be added directly beneath
the MEMSIC device. The size of the plane should be
similar to the MEMSIC device’s footprint and be as
thick as possible.
5. Vias can be added symmetrically around the ground
plane. Vias increase thermal isolation of the device
from the rest of the PCB.
相關PDF資料 |
PDF描述 |
|---|---|
| MXR9500G | Low Cost 【1.5 g Tri Axis Accelerometer with Ratiometric Outputs |
| MXR9500M | Low Cost 【1.5 g Tri Axis Accelerometer with Ratiometric Outputs |
| MZPS2005610A | Miniature Relays Series M Type MZ 2 poles 10A Monostable |
| MZPC0024110A | Circular Connector; No. of Contacts:26; Series:; Body Material:Aluminum; Connecting Termination:Solder; Connector Shell Size:16; Circular Contact Gender:Socket; Circular Shell Style:Straight Plug; Insert Arrangement:16-26 |
| MZPC0024210A | Circular Connector; Body Material:Aluminum; Series:PT06; No. of Contacts:26; Connector Shell Size:16; Connecting Termination:Crimp; Circular Shell Style:Straight Plug; Circular Contact Gender:Socket; Insert Arrangement:16-26 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MXR7210ML | 制造商:MEMSIC 功能描述:ACCELEROMETER 2 AXIS ?0G LCC8 制造商:MEMSIC 功能描述:ACCELEROMETER, 2 AXIS, 10G, LCC8 |
| MXR7250VW | 功能描述:Accelerometer X, Y Axis ±5g 27Hz 8-LCC 制造商:memsic inc. 系列:- 包裝:剪切帶（CT） 零件狀態:停產 類型:模擬 軸:X，Y 加速度范圍:±5g 靈敏度（LSB/g）:- 靈敏度（mV/g）:250 帶寬:27Hz 輸出類型:模擬電壓 電壓 - 電源:4.5 V ~ 5.25 V 特性:- 工作溫度:-40°C ~ 95°C（TA） 安裝類型:表面貼裝 封裝/外殼:8-LCC 供應商器件封裝:8-LCC 標準包裝:1 |
| MXR7250VW-B | 功能描述:MXR7250VW - Accelerometer, 2 Axis Sensor Evaluation Board 制造商:memsic inc. 系列:- 零件狀態:有效 傳感器類型:加速計，2 軸 感應范圍:±5g 接口:模擬 靈敏度:250mV/g 電壓 - 電源:4.5 V ~ 5.25 V 嵌入式:否 所含物品:板 使用的 IC/零件:MXR7250VW 標準包裝:1 |
| MXR7305VF | 制造商:MEMSIC INC 功能描述:IC ACCELEROMETER XY AXIS LCC8 |
| MXR7305VF-B | 制造商:MEMSIC INC 功能描述:BOARD EVAL FOR MXR7305VF |
發布緊急采購，3分鐘左右您將得到回復。