![](http://datasheet.mmic.net.cn/170000/MS-90211G-100-04-008-0_datasheet_9336702/MS-90211G-100-04-008-0_1.png)
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M Pleated Foil I/O Cable Assemblies
MDR Version
Physical
Electrical
Environmental
(Connector) Technical Specification: See TS-0423 for .050
″ Mini D-Ribbon (MDR)
(Cable) Construction: 0.025
″ Pleated Foil Shielded, 30 AWG (solid), TPE Primary
50 Ohm Technical Specifications: See TS-0285 for 90101 - Gray PVC Jacket
See TS-0402 for 90201 - Gray TPE Cover
See TS-0876 for 93101 - Low Skew, Gray PVC Jacket
75 Ohm Technical Specifications: See TS-0451 for 90111 - Gray PVC Jacket
See TS-0598 for 90211 - Gray TPE Cover
(Shells) Overmolded: 68, 80 and 100 positions, thumbscrews
Glass Reinforced Polyester (PBT) - Gray
Metal: See TS-0655 - 20, 26, 36 and 40 position, latching
See TS-0396 - 50 position, latching
See TS-0355 - 68 position, latching
See TS-0666 - 68, 80 and 100 position, thumbscrew
(Jackscrews) Material: Steel
Plating: Nickel on #4-40
Zinc Trivalent Black on M2.5
Voltage Rating: 30 V
Impedance: See Pleated Foil Cable (PFC) Specifications
Temperature Rating: 75
°C maximum
TS-0804-08
Sheet 1 of 4
Mates with standard 3M MDR Boardmount Headers
Pleated copper foil provides a 360 degree shield
Overmolded Assemblies
Available in 68, 80 and 100 Positions
Molded-in strain relief
Can utilize either #4-40 or M2.5 thumbscrews
Supplied as a complete assembly only
Metal Shell Assemblies
Metal shells available in 20, 26, 36, 40, 50, 68, 80 and
100 Positions
Offer quick release feature on 20 to 68 position for ease
of installation
68, 80 and 100 positions available with thumbscrews
RoHS* compliant
Date Modified: April 12, 2007
UL File No.: E86982
*"RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum
concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application
that is exempt under EU RoHS. This information represents 3M's knowledge and belief, which may be based in whole or in part on information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive
remedy will be in accordance with the Warranty stated below.