- 您現在的位置：買賣IC網 > PDF目錄368087 > P0800SA 14 Pin, 1.5 KB Std Flash, 67 RAM, 12 I/O, Pb Free, -40C to +125C, 14-PDIP, TUBE PDF資料下載
參數資料
| 型號： | P0800SA |
| 英文描述： | 14 Pin, 1.5 KB Std Flash, 67 RAM, 12 I/O, Pb Free, -40C to +125C, 14-PDIP, TUBE |
| 中文描述： | SIDAC的| 95V V（下公報）最大| 10A條口（縣）|的DO - 214AA |
| 文件頁數： | 5/6頁 |
| 文件大?。?/td> | 114K |
| 代理商： | P0800SA |
5
www.protekdevices.com
PP0640EA
thru
PP3500EC
05121.R1 4/02
APPLICATION NOTES
FIGURE 1: UL 1459 & FCC Part 68 - Metallic Protection
The TSS (Thyristor Surge Suppressor) device is located across the
tip-to-ring after a limiting resistor and fuse combination. R
TIP
and
R
resistors are optional depending upon the TSS device
selection. Without the resistors, the PP3100EB/EC is recommended.
However, with a resistance value of 7.5 Ohms for tip and ring, the
PP3100EA is recommended. Digital signals may use a lower TSS
device depending upon the total tip to ring voltage range. Selection
of the TSS device, either PPxxxxEA or EB/EC is based upon the
value of the tip and ring resistors. For the National Electric Code
(NEC) article 800, it is recommended that at least one fuse be used
in the tip or ring line for metallic surges. Fuses may be replaced with
a suitable Positive Temperature Coefficient (PTC) automatic
resettable current limiting device.
FIGURE 2 - UL 1459 & FCC Part 68 - Longitudinal Protection
There are two TSS devices, one located from tip-to-ground and one
ring-to-ground. For standard analog signals, the PP3100EA is
recommended with a typical resistor value for tip and ring of 15
Ohms. The PP3100EB/EC is recommended for resistor values of
7.5 Ohms each. The National Electric Code (NEC) article 800
requires two fuse elements when connecting to ground. Fuses or a
suitable Positive Temperature Coefficient (PTC) automatic resettable
current limiting device may be used. The purpose of this circuit is to
limit AC power current from getting on the ground line causing any
safety hazard.
FIGURE 3 - UL 1459 & FCC Part 68 - Metallic & Longitudinal
Protection
Three equal TSS devices are used in this application for metallic (tip-
to-ring) and longitudinal (tip-to-ground and ring-to-ground) protection.
For analog signals, the PP3100EB/EC is recommended. With a
resistance value of 15 Ohms for the tip and ring resistors, the
PP3100EA may be used. The National Electric Code (NEC) article
800 requires two fuse elements when connecting to ground. Fuses
or a suitable Positive Temperature Coefficient (PTC) automatic
resettable current limiting device may be used. This circuit is
recommended for protection against the Bellcore requirement: First
Level Lightning Surge Tests (Telecommunications Port), document #
GR-1089-CORE.
Fuse
TIP
R
Tip
RING
To
Protected
Equipment
R
Ring
FIGURE 1 - Metallic Protection
Tip
R
To
Protected
Equipment
Ring
R
TIP
RING
FIGURE 2 - Longitudinal Protection
Tip
R
To
Protected
Equipment
Ring
R
TIP
RING
FIGURE 3 - Metallic & Longitudinal Protection
相關PDF資料 |
PDF描述 |
|---|---|
| P0800SB | 14 Pin, 1.5 KB Std Flash, 67 RAM, 12 I/O, Pb Free, -40C to +125C, 14-TSSOP, TUBE |
| P0800SC | 14 PIN, 1.5KB STD FLASH, 67 RAM, 12 I/O, PB FREE, -40C to +85C, 14-TSSOP, TUBE |
| P1500EA | Direct ProTek Replacement:PP1500EA |
| PP0640EB | Direct ProTek Replacement:PP0640EB |
| PP0640EC | Direct ProTek Replacement:PP0640EC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| P0800SARP | 制造商:Teccor by Littelfuse 功能描述:20 A, SILICON SURGE PROTECTOR, DO-214AA |
| P0800SB | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:SIDAC|DO-214AA |
| P0800SC | 制造商:Teccor by Littelfuse 功能描述:60 A, SILICON SURGE PROTECTOR, DO-214AA |
| P0800SCRP | 制造商:Teccor by Littelfuse 功能描述:60 A, SILICON SURGE PROTECTOR, DO-214AA |
| P0801 | 功能描述:電源排插 6 OUTLET - 3’ CORD RoHS:否 制造商:Wiremold 出口數量: 浪涌能量額定值: 數據線路保護:N 電線長度:15 ft 安裝風格: 輸出電壓:120 V 電流額定值:15 A |
發布緊急采購，3分鐘左右您將得到回復。