![](http://datasheet.mmic.net.cn/180000/PALLV22V10Z-25JI_datasheet_11342388/PALLV22V10Z-25JI_10.png)
10
PALLV22V10Z-25
USE
GAL
DEVICES
FOR
NEW
DESIGNS
ABSOLUTE MAXIMUM RATINGS
Storage Temperature . . . . . . . . . . . . . .-65°C to +150°C
Ambient Temperature with
Power Applied . . . . . . . . . . . . . . . . . .-55°C to +125°C
Supply Voltage with
Respect to Ground . . . . . . . . . . . . . . . -0.5 V to +7.0 V
DC Input Voltage . . . . . . . . . . . . . . . . -0.5 V to +5.5 V
DC Output or I/O Pin Voltage . . . . . . . -0.5 V to +5.5 V
Static Discharge Voltage . . . . . . . . . . . . . . . . . 2001 V
Latchup Current (TA = -40°C to 85°C). . . . . . . . 100 mA
Stresses above those listed under Absolute Maximum Ratings
may cause permanent device failure. Functionality at or above
these limits is not implied. Exposure to Absolute Maximum Rat-
ings for extended periods may affect device reliability. Pro-
gramming conditions may differ.
OPERATING RANGES
Industrial (I) Devices
Ambient Temperature (TA) . . . . . . . . . . -40°C to +85°C
Supply Voltage (VCC) with
Respect to Ground. . . . . . . . . . . . . . . +3.0 V to +3.6 V
Operating ranges dene those limits between which the func-
tionality of the device is guaranteed.
Notes:
1. These are absolute values with respect to device ground, and all overshoots due to system or tester noise are included.
2. I/O pin leakage is the worst case of IIL and IOZL (or IIH and IOZH).
3. Not more than one output should be shorted at a time, and the duration of the short-circuit should not exceed one second.
VOUT = 0.5 V has been chosen to avoid test problems caused by tester ground degradation.
4. This parameter is guaranteed under worst case test conditions. Refer to the ICC vs. Frequency graph in this datasheet for typical
ICC characteristics.
DC CHARACTERISTICS OVER INDUSTRIAL OPERATING RANGES
Parameter
Symbol
Parameter Description
Test Conditions
Min
Max
Unit
VOH
Output HIGH Voltage
VIN = VIH or VIL
VCC = Min
IOH = -2 mA
2.4
V
IOH = -100 AVCC -0.3
V
VOL
Output LOW Voltage
VIN = VIH or VIL
VCC = Min
IOL = 2 mA
0.4
V
IOL = 100 A
0.2
V
VIH
Input HIGH Voltage
Guaranteed Input Logical HIGH
Voltage for all Inputs (Note 1)
2.0
5.5
V
VIL
Input LOW Voltage
Guaranteed Input Logical LOW
Voltage for all Inputs (Note 1)
0.8
V
IIH
Input HIGH Leakage Current
VIN = VCC, VCC = Max
10
A
IIL
Input LOW Leakage Current
VIN = 0 V, VCC = Max
-10
A
IOZH
Off-State Output Leakage
Current HIGH
VOUT = VCC, VCC = Max
VIN = VIH or VIL (Note 2)
10
A
IOZL
Off-State Output Leakage
Current LOW
VOUT = 0 V, VCC = Max
VIN = VIH or VIL (Note 2)
-10
A
ISC
Output Short-Circuit Current
VOUT = 0.5 V, VCC = Max (Note 3)
-5
-75
mA
ICC
Supply Current
Outputs Open (IOUT = 0 mA)
VCC = Max (Note 4)
f = 0 MHz
30
A
f = 15 MHz
55
mA