8-bi" />
參數資料
型號: PCA9501PW,112
廠商: NXP Semiconductors
文件頁數: 15/28頁
文件大小: 0K
描述: IC I/O EXPANDER I2C 8B 20TSSOP
產品培訓模塊: I²C Bus Fundamentals
特色產品: NXP - I2C Interface
標準包裝: 75
接口: I²C,SM 總線
輸入/輸出數: 8
中斷輸出:
頻率 - 時鐘: 400kHz
電源電壓: 2.5 V ~ 3.6 V
工作溫度: -40°C ~ 85°C
安裝類型: 表面貼裝
封裝/外殼: 20-TSSOP(0.173",4.40mm 寬)
供應商設備封裝: 20-TSSOP
包裝: 管件
包括: EEPROM
產品目錄頁面: 824 (CN2011-ZH PDF)
配用: 568-4002-ND - DEMO BOARD I2C
其它名稱: 568-1026-5
935271535112
PCA9501PW
PCA9501_4
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 04 — 10 February 2009
22 of 28
NXP Semiconductors
PCA9501
8-bit I2C-bus and SMBus I/O port with interrupt, 2-kbit EEPROM
14. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note
AN10365 “Surface mount reow
soldering description”.
14.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for ne pitch SMDs. Reow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
14.2 Wave and reow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature prole. Leaded packages,
packages with solder balls, and leadless packages are all reow solderable.
Key characteristics in both wave and reow soldering are:
Board specications, including the board nish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
14.3 Wave soldering
Key characteristics in wave soldering are:
Process issues, such as application of adhesive and ux, clinching of leads, board
transport, the solder wave parameters, and the time during which components are
exposed to the wave
Solder bath specications, including temperature and impurities
相關PDF資料
PDF描述
PCA9501PW,118 IC I/O EXPANDER I2C 8B 20TSSOP
PCA9535PW,112 IC I/O EXPANDER I2C 16B 24TSSOP
PCA9535PW,118 IC I/O EXPANDER I2C 16B 24TSSOP
PCA9535D,112 IC I/O EXPANDER I2C 16B 24SOIC
PCA9500PW,112 IC I/O EXPANDER I2C 8B 16TSSOP
相關代理商/技術參數
參數描述
PCA9501PW118 制造商:Rochester Electronics LLC 功能描述: 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述:
PCA9501PW-T 制造商:NXP Semiconductors 功能描述:I2C and SMBus I/O Port 20-Pin TSSOP T/R 制造商:NXP Semiconductors 功能描述:8-BIT I2C-BUS AND SMBUS I/O PORT WITH INTERRUPT, 2-KBIT EEPROM AND 6 ADDRESS PINS
PCA9502 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:8-bit I/O expander with I2C-bus/SPI interface
PCA9502BS 功能描述:接口-I/O擴展器 8-BITI/O EXPDR W/I2C-SPI INTRF RoHS:否 制造商:NXP Semiconductors 邏輯系列: 輸入/輸出端數量: 最大工作頻率:100 kHz 工作電源電壓:1.65 V to 5.5 V 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:HVQFN-16 封裝:Reel
PCA9502BS,128 功能描述:接口-I/O擴展器 8-BITI/O EXPDR RoHS:否 制造商:NXP Semiconductors 邏輯系列: 輸入/輸出端數量: 最大工作頻率:100 kHz 工作電源電壓:1.65 V to 5.5 V 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:HVQFN-16 封裝:Reel