PIC16(L)F1782/3
DS41579C-page 370
Preliminary
2011-2012 Microchip Technology Inc.
D017
Supply Current (IDD)(1, 2)
—
130
180
A1.8
FOSC = 500 kHz
MFINTOSC mode
—
150
250
A3.0
D017
—
150
250
A
2.3
FOSC = 500 kHz
MFINTOSC mode (Note 5)
—
170
330
A
3.0
—
220
430
A
5.0
D019
—
0.8
2.2
mA
1.8
FOSC = 16 MHz
HFINTOSC mode
—1.2
3.7
mA
3.0
D019
—
1.0
2.3
mA
2.3
FOSC = 16 MHz
HFINTOSC mode (Note 5)
—
1.3
3.9
mA
3.0
—
1.4
4.1
mA
5.0
D020
—
2.1
6.2
mA
3.0
FOSC = 32 MHz
HFINTOSC mode
—
2.5
7.5
mA
3.6
D020
—
2.1
6.5
mA
3.0
FOSC = 32 MHz
HFINTOSC mode
—
2.2
7.5
mA
5.0
D022
—
2.1
6.2
mA
3.0
FOSC = 32 MHz
HS Oscillator mode (Note 6)
—2.5
7.5
mA
3.6
D022
—
2.1
6.5
mA
3.0
FOSC = 32 MHz
HS Oscillator mode (Note 5, 6)
—
2.2
7.5
mA
5.0
30.2
DC Characteristics: PIC16(L)F1782/3-I/E (Industrial, Extended) (Continued)
PIC16LF1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C
TA +85°C for industrial
-40°C
TA +125°C for extended
PIC16F1782/3
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C
TA +85°C for industrial
-40°C
TA +125°C for extended
Param
No.
Device
Characteristics
Min.
Typ
Max.
Units
Conditions
VDD
Note
Note 1:
The test conditions for all IDD measurements in active operation mode are: OSC1 = external square wave, from
rail-to-rail; all I/O pins tri-stated, pulled to VDD; MCLR = VDD; WDT disabled.
2:
The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the current
consumption.
3:
For RC oscillator configurations, current through REXT is not included. The current through the resistor can be extended
by the formula IR = VDD/2REXT (mA) with REXT in k
4:
FVR and BOR are disabled.
5:
0.1
F capacitor on VCAP.
6:
8 MHz crystal oscillator with 4x PLL enabled.