
PM300CE SERIES
Single, dual and triple output
[ 2 YEAR WARRANTY ]
Encapsulated package
2.5 to 15W modules
230VAC input (115VAC version, see PM300 series)
Chassis mounting inserts
Terminal strip connections
Short circuit protection
EN55022, EN55011 conducted emissions level B
EN61000-4-2, -3, -4, -5, -6 compliant
Meets EN60950
The PM300CE series is an encapsulated, chassis mountable linear AC/DC power
module with the CE mark to demonstrate compliance with the Low Voltage Directive
for European applications. The series has single, dual and triple output models with
industry standard output configurations operating from an input voltage of 230VAC
making the PM300CE series suitable for a wide range of low power chassis
applications. The PM300CE series includes 2.5W to 15W modules. Each module has
short-circuit protection and the 5V outputs also have overvoltage protection.
Conservative design and rating of these modules results in reliable operation and long
life. There are four threaded inserts in the bottom of each module for convenient
chassis mounting. The PM300CE design is a low emissions design with tightly
regulated outputs making the series especially suitable for test, measurement and
instrumentation equipment.
SPECIFICATION
All specifications are typical at nominal input, full load at 25
°
C unless otherwise stated
PAGE 1
OUTPUT SPECIFICATIONS
Voltage accuracy
±1.0%, max.
Line regulation
See table on
facing page
Load regulation
See table on
facing page
Temperature coefficient
±0.02%/°C
Overvoltage protection
(See Note 4)
5V outputs only
6.2V typical
Output power limit
130% to 200% FL typ.
Short circuit protection
100% to 200% FL
INPUT SPECIFICATIONS
Input voltage range
230VAC ±10%
Input frequency range
(See Note 2)
47Hz to 400Hz
Safety ground leakage
current
<3.5mA @ 50Hz
EMC CHARACTERISTICS
Conducted emissions
Radiated emissions
ESD air
ESD contact
Surge
Fast transients
Radiated immunity
Conducted immunity
EN55022
EN55022
EN61000-4-2, level 3
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
Level B
Level B
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
GENERAL SPECIFICATIONS
Efficiency
40% typical
Isolation voltage
3000VAC
Isolation capacitance
50pF
Approvals and
standards (See Note 5)
Meets EN60950
Case material
UL94V-0
Non-conductive
black plastic
Weight
Case C1
Case C2
567g (20.02oz)
816g (28.80oz)
MTBF (See Note 3)
710,000 hours
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating ambient
Non-operating amb.
Derating, 50°C to 71°C
Cooling
–25°C to +71°C
–25°C to +71°C
2.5%/°C
Free-air convection
cooled
Relative Humidity
Non-condensing
20% to 95% RH