參數資料
型號： PP-MOD1V2
英文描述： ISP INTERFACE MODULE
中文描述： ISP的接口模塊
文件頁數： 46/48頁
文件大小： 3471K
代理商： PP-MOD1V2
ISP Interface Module Version 1.00 27/06/01
39
9.4.3 EQTools Project / Script Implementation
In order for the PPM to automatically detect the Target System Vcc Voltage, it is necessary to
set up a Programming Project and Script within EQTools as follows:
9.4.3.1 EQTools – Programming Project Setup
The EQTools project must be set up as follows:
i.
Set up so that the PPM Powers the Target System/Interface Module
ii. Set up the target power supply voltage to +5V and set the current to eg. 100mA
iii. Measure and set up the ‘Target Connect’ and ‘Target Disconnect’ voltages for your
Target System
iv. Enable ‘Detect Target Connect’ and ‘Detect Target Disconnect’ on the <Entry/Exit> tab of
your Programming Project.
9.4.3.2 EQTools – Script File Setup
The EQTools Script File must be set up as follows:
i.
In the <Base Project> and <Target Autoprogram1> tabs, select the required
Programming Project which you have just created
ii. In the <Target Connection and Disconnection> tab, select
‘PPM Auto-connect -> PPM
Auto-disconnect’
9.4.4 Running the Script/Project Files
Once you have created the require Programming Project and Script File, these can then be
tested with EQTools or ISP-PRO as follows:
i.
Make sure the Target System is NOT connected to the programmer
ii. Run the Script File
à
The Connect Icon should appear.
iii. Connect the Target System to the PIM
iv. Switch on the external Target Power Supply
à
The PPM should detect the presence of the Target Vcc Voltage and the icon should
change to the ‘Auto-Program’ icon.
v. When the programming sequence is complete (PASS or FAIL), either the PASS or FAIL
DISCONNECT icons will be displayed.
vi. Switch off the external Target Power Supply
à
The PPM should detect the absence of the Target Vcc and the <Connect> icon should
reappear.
vii. Remove the Target System
相關PDF資料
PDF描述
PP01002 GEHOERSCHUTZ OHRSTOEPSEL 250ST Inhalt pro Packung: 250 Stk.
PP0901SA Direct ProTek Replacement:PP0901SA
PP0901SB Direct ProTek Replacement:PP0901SB
PP1101SB Direct ProTek Replacement:PP1101SB
PP1101SC Direct ProTek Replacement:PP1101SC
相關代理商/技術參數
參數描述
PPM-PLS 制造商:Panduit Corp 功能描述:
PPM-Q 制造商:Panduit Corp 功能描述:
PPMR0004B 功能描述:LABEL 30'X8" WHITE/GREEN 制造商:panduit corp 系列:- 包裝:卷 零件狀態:在售 類型:標簽 標簽類型:- 標簽尺寸:- 材料:乙烯基 顏色:白色，綠色 配套使用產品/相關產品:- 標準包裝:1
PPMR0005B 功能描述:LABEL 30'X8" WHITE/BLUE 制造商:panduit corp 系列:- 包裝:卷 零件狀態:在售 類型:標簽 標簽類型:- 標簽尺寸:- 材料:乙烯基 顏色:白色，藍色 配套使用產品/相關產品:- 標準包裝:1
PPMR0012B 功能描述:ROLL PIPE MRKR,GAS8X30FT,8"X30FT 制造商:panduit corp 系列:- 包裝:卷 零件狀態:在售 類型:標簽 標簽類型:- 標簽尺寸:- 材料:乙烯基 顏色:黑色，黃色 配套使用產品/相關產品:- 標準包裝:1
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*