Product # PQ60012EKx30
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-0005860 Rev. 1
08/24/10
Page 1
Technical
Specification
PQ60012EKx30
Contents
Operational Features
High efficiency, 85% at full rated load current
Delivers up to 30A of output current with minimal derating
- no heatsink required
Wide input voltage range: 35-75V, with 100V & 100ms input voltage
transient capability
Fixed frequency switching provides predictable EMI performance
No minimum load requirement means no preload resistors required
Protection Features
Input under-voltage lockout disables converter at low input
voltage conditions
Output current limit and short circuit protection protects
converter and load from permanent damage and consequent
hazardous conditions
Active back bias limit prevents damage to converter
from external load induced pre-bias
Output over-voltage protection protects load from
damaging voltages
Thermal shutdown protects converter from abnormal
environmental conditions
PQ60012EKx30 Module
Control Features
On/Off control referenced to input side
(positive and negative logic options are available)
Remote sense for the output voltage compensates for output
distribution drops
Output voltage trim permits custom voltages and voltage margining
The PQ60012EKx30 PowerQor Eighth-brick converter
is a next-generation, board-mountable, isolated,
fixed switching frequency DC/DC converter that uses
synchronous rectification to achieve extremely high
conversion efficiency. The power dissipated by the
converter is so low that a heatsink is not required, which
saves cost, weight, height, and application effort. All
of the power and control components are mounted to
the multi-layer PCB substrate with high-yield surface
mount technology. Since the PowerQor converter has
no explicit thermal interfaces, it is extremely reliable.
RoHS compliant (see last page).
35-75V
100V
1.2V
36W
2000V dc
Eighth-brick
Input
Transient Input
Output
Max Power
Isolation
DC-DC Converter
Safety Features
Pending
UL 60950-1:2007
EN60950-1/A11:2009/A2:2010
CAN/CSA-C22.2 No. 60950-1:2007
IEC 61000-4-2
Mechanical Features
Industry standard Eighth-brick pin-out configuration
Size: 2.30" x 0.90" x 0.427", 58.4 x 22.9 x 10.9 mm
Total weight: 1.48 oz (42 g)
Page No.
advanced