參數資料
型號: PSC366-7LIRPCD
元件分類: 電源模塊
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
文件頁數: 11/11頁
文件大小: 238K
代理商: PSC366-7LIRPCD
PSC-Family
Switching Regulators, PCB & Chassis
Rugged Environment
4 - 30
Edition 2/96 - Melcher AG
MELCHER
The Power Partners.
4.1
Description of Options
Option -9 Extended Temperature Range
The operational ambient temperature range is extended to
TA = –40...71
°C.
Option L Input filter
Option L is recommended to reduce superimposed inter-
ference voltages, and to prevent oscillations, if input lines
exceed approx. 5 m in total length. The fundamental wave
(approx. 120 kHz) of the reduced interference voltage be-
tween Vi+ and Gi– has, with an input line inductance of
5
H a maximum magnitude of 4 mVrms.
The input impedance of the switching regulator at 120 kHz
is about 50 m
. The harmonics are small in comparison
with the fundamental wave. See also data: RFI.
With option L, the maximum permissible additionally super-
imposed ripple
ui of the input voltage (rectifier mode) at a
specified input frequency
f i has the following values:
ui max = 10 Vpp at 100 Hz or Vpp = 1000 Hz/fi 1 V
However, the minimum differential voltage
Ui o min between
input and output voltages as specified in "Electrical Input
and Output Data" should be maintained.
Option P Potentiometer
Option P and the R-function cannot be supported simulta-
neously. The output voltage
Uo can be adjusted with a
screwdriver in the range from 0.92...1.08 of the nominal
output voltage
Uo nom.
Option C Thyristor Crowbar
This option is recommended to protect the load against
power supply malfunction, but it is not designed to sink ex-
ternal currents.
A fixed-value monitoring circuit checks the output voltage
Uo. When the trigger voltage Uoc is reached, the thyristor
crowbar triggers and disables the output. It may be deacti-
vated by removal of the input voltage. In case of a switching
transistor defect, an internal fuse prevents excessive cur-
rent.
Note: As a central overvoltage protection device, the crow-
bar is usually connected to the external load via distributed
inductance of the lines. For this reason, the overvoltage at
the load can temporarily exceed the trigger voltage
Uoc. De-
pending on the application, further decentralized over-
voltage protection elements may have to be used addition-
ally.
Table 9: Crowbar trigger levels
Characteristics
Conditions
12 V
15 V
24 V
36 V
48 V
Unit
min
max
min
max
min
max
min
max
min
max
Uo c
Trigger voltage
Ui min...Ui max
13.5
16
16.5
19
27
31
40
45.5
55
60
V
Io = 0...Io nom
t s
Delay time
TC min...TC max
1.5
s
Option U Ambient Temp. Range acc. UL Recognition
Underwriters Laboratories (UL) have approved the PSC
family as recognized components up to an ambient tem-
perature of
TA max – 25 K given by the upper temperature
limit of the standard PCB material. If the full maximum am-
bient temperature
T
A max is required with UL approval, op-
tion U should be requested. It consists of an alternative
PCB material with a higher maximum temperature specifi-
cation.
The European approval boards have in contrast to UL ac-
cepted the standard PCB material to be operated up to
TA max = 71°C without any further precautions.
相關PDF資料
PDF描述
PSC246-7LIRPCD 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC246-9LIRPCD 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC126-9LIRPCD 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC156-9LIRPCD 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC486-7LIRPCD 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
PSC366-9IR 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 36V 6A 216W 9PIN - Bulk
PSC368-7IR 功能描述:SWITCHING REGULATOR 288W 36V RoHS:是 類別:電源 - 板載 >> DC DC Converters 系列:* 標準包裝:5 系列:*
PSC-368-9-IR 功能描述:DC/DC轉換器 36VDC 8Aout, 288W RoHS:否 制造商:Murata 產品: 輸出功率: 輸入電壓范圍:3.6 V to 5.5 V 輸入電壓(標稱): 輸出端數量:1 輸出電壓(通道 1):3.3 V 輸出電流(通道 1):600 mA 輸出電壓(通道 2): 輸出電流(通道 2): 安裝風格:SMD/SMT 封裝 / 箱體尺寸:
PSC368-9IR 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 36V 8A 288W 9PIN - Bulk
PS-C-375-BK 制造商:Brady Corporation 功能描述:0.645 IN W X 75 FT H (W 16.380 MM W X 22.86 M H)