參數資料
型號: PSC5A10-9LIPC
廠商: POWER-ONE INC
元件分類: 電源模塊
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
文件頁數: 2/13頁
文件大?。?/td> 223K
代理商: PSC5A10-9LIPC
PSC Series Extended Data Sheet
Positive Switching Regulators (Industrial)
REV. MAY 12, 2004
Page 10 of 13
Table 9: Insulation concept leading to an SELV output circuit
Conditions Front end
Switching regulator
Result
Supply
Minimum required grade
Maximum
Minimum required safety
Measures to achieve the
Safety status of
voltage
of isolation, to be provided DC output
status of the front end
specified safety status of the
the switching
by the AC-DC front end,
voltage
output circuit
regulator output
including mains supplied
from the
circuit
battery charger
front end 1
Battery
Double or Reinforced
60 V
SELV circuit
None
SELV circuit
supply,
>60 V
Earthed hazardous voltage Input fuse 3 non accessible
Earthed SELV
considered
secondary circuit 2
case 5
circuit
as secon-
Unearthed hazardous
Input fuse 3 and unearthed,
Unearthed SELV
dary circuit
voltage secondary circuit 5
non accessible case 5
circuit
Hazardous voltage
Input fuse 3 and earthed output Earthed SELV
secondary circuit
circuit 4 and non accessible
circuit
case 5
Mains
Basic
60 V
Earthed SELV circuit 4
None
250 V AC
ELV circuit
Input fuse 3 and earthed output
>60 V
Hazardous voltage
circuit 4 and non accessible
secondary circuit
case 5
Double or reinforced
60 V
SELV circuit
None
SELV circuit
>60 V
Double or reinforced insu-
Input fuse 3 and unearthed
Unearthed SELV
lated unearthed hazardous and non accessible case 5
circuit
voltage secondary circuit 5
1 The front end output voltage should match the specified input voltage range of the switching regulator.
2 The conductor to the Gi– terminal of the switching regulator has to be connected to earth by the installer according to the relevant
safety standard, e.g. IEC/EN 60950.
3 The installer shall provide an approved fuse (slow blow type with the lowest current rating suitable for the application, max. 12.5 A) in
a non-earthed input conductor directly at the input of the switching regulator. If Vo+ is earthed, insert the fuse in the Gi- line. For UL’s
purpose, the fuse needs to be UL-listed. If option C is fitted, a suitable fuse is already built-in in the Vi+ line.
4 The earth connection has to be provided by the installer according to the relevant safety standard, e.g. IEC/EN 60950.
5 Has to be insulated from earth by double or reinforced insulation according to the relevant safety standard, based on the maximum
output voltage from the front end.
Safety of Operator Accessible Output Circuit
If the output circuit of a switching regulator is operator-ac-
cessible, it shall be an SELV circuit according to IEC/EN
60950 related safety standards
The following table shows some possible installation con-
figurations, compliance with which causes the output circuit
of the switching regulator to be an SELV circuit according to
IEC/EN 60950 up to a nominal output voltage of 30 V, or
48 V if option C is fitted.
However, it is the sole responsibility of the installer or user
to assure the compliance with the relevant and applicable
safety regulations.
More information is given in:
Technical Information: Safety
& EMC.
相關PDF資料
PDF描述
PSC128-9IR 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC158-7LIPCD1 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC158-9IP 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC368-9LIRCD 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
PSC5A10-9LIPD1 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
相關代理商/技術參數
參數描述
PSC5A11-2 功能描述:SWITCHING REGULATOR 56.1W 5.1V RoHS:是 類別:電源 - 板載 >> DC DC Converters 系列:* 標準包裝:5 系列:*
PSC5A11-2IR 制造商:Power-One 功能描述:- Bulk
PSC5A12-7IP 制造商:Power-One 功能描述:- Bulk
PSC5A12-7IR 功能描述:SWITCHING REGULATOR 61.2W 5.1V RoHS:是 類別:電源 - 板載 >> DC DC Converters 系列:* 標準包裝:5 系列:*
PSC5A12-7LIR 制造商:Power-One 功能描述:- Bulk