參數資料
型號： PSD411A1-15JI
英文描述： 100V 100kRad Hi-Rel Single N-Channel TID Hardened MOSFET in a TO-204AA package; A IRH7130 with Standard Packaging
中文描述： 現場可編程外圍
文件頁數： 64/123頁
文件大?。?/td> 657K
代理商： PSD411A1-15JI
PSD4XX Famly
61
9.4 Memory Block
The PSD4XX provides EPROM memory for code storage and SRAM memory for scratch
pad usage. Chip selects for the memory blocks come from the DPLD decoding logic and
are defined by the user in the PSDsoft Software. Figure 32 shows the organization of the
Memory Block.
The PSD4XX family uses Zero-power memory techniques that place memory into Standby
Mode between MCU accesses. The memory becomes active briefly after an address
transition, then delivers new data to the outputs, latches the outputs, and returns to standby.
This is done automatically and the designer has to do nothing special to benefit from this
feature. Both the EPROM and SRAM have this feature.
9.4.1 EPROM
The PSD4XX provides three EPROM densities: 256Kbit, 512Kbit, or 1Mbit. The EPROM
is divided into four 8K, 16K or 32K byte blocks. Each block has its own chip select signals
(ES0 – ES3). The EPROM can be configured as 32K x 8, 64K x 8 or 128K x 8 for
microcontrollers with an 8-bit data bus. For 16-bit data buses, the EPROM is configured as
16K x 16, 32K x 16 or 64K x 16.
9.4.2 SRAM
The SRAM has 16Kbits of memory, organized as 2K x 8 or 1K x 16. The SRAM is enabled
by chip select signal RS0 from the DPLD. The SRAM has a battery back-up (STBY) mode.
This back-up mode is invoked when the V
CC
voltage drops under the Vstdby voltage by
approximately 0.7 V. The Vstdby voltage is connected only to the SRAM and cannot be
lower than 2.7 volts.
9.4.3 Memory Select Map
The EPROM and SRAM chip select equations are defined in the ABEL file in terms of
address and other DPLD inputs. The memory space for the EPROM chip select
(ES0 – ES3) should not be larger than the EPROM block (8KB, 16KB, or 32KB) it is
selecting.
The following rules govern how the internal PSD4XX memory selects/space are defined:
J
The EPROM blocks address space cannot overlap
J
SRAM, internal I/O and Peripheral I/O space cannot overlap
J
SRAM, internal I/O and Peripheral I/O space can overlap EPROM space, with
priority given to SRAM or I/O. The portion of EPROM which is overlapped
cannot be accessed.
The Peripheral I/O space refers to memory space occupied by peripherals when Port A is
configured in the Peripheral I/O Mode.
The PSD4XX
Architecture
(cont.)
相關PDF資料
PDF描述
PSD411A1-15LI -60V 100kRad Hi-Rel Single P-Channel TID Hardened MOSFET in a SMD-0.5 package; Similar to IRHNJ597034 with optional Total Dose Rating of 300kRads
PSD411A1-15U 400V 100kRad Hi-Rel Single N-Channel SEE Hardened MOSFET in a TO-205AF package; A IRHF7310SE with Standard Packaging
PSD411A1-15UI 250V 100kRad Hi-Rel Single N-Channel SEE Hardened MOSFET in a TO-205AF package; JANS Certified Part Number
PSD411A1-20J 250V 100kRad Hi-Rel Single N-Channel SEE Hardened MOSFET in a SMD-2 package; JANS Certified device. Equivalent to IR Part Number IRHNA57264SE
PSD411A1-20JI -30V 100kRad Hi-Rel Single P-Channel TID Hardened MOSFET in a SMD-2 package; A IRHNA597Z60 with Standard Packaging
相關代理商/技術參數
參數描述
PSD411A1-15LI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Field-Programmable Peripheral
PSD411A1-15U 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Field-Programmable Peripheral
PSD411A1-15UI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Field-Programmable Peripheral
PSD411A1-20J 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Field-Programmable Peripheral
PSD411A1-20JI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Field-Programmable Peripheral
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*