Rubber Duck/Portable
Antenna Series (Pat.Pend.)
For 2.4 GHz Applications
Frequency:
2.4 - 2.485 GHz
Gain:
2.5 dBi max for 1/2 wave,
0 dBi max for 1/4 wave
Bandwidth@2:1 SWR:
85 MHz or better
Impedance:
50 Ohm nominal
Maximum Power:
10 Watts
Whip Length:
1/2 wave straight
4 inches
1/2 wave right angle
5.75 inches
1/4 wave stub
1.25 inches
Specifications
Halfwave models shown
Stubby model
Right angle model
The halfwave antennas require no ground plane for
operation. This makes the antenna ideal for use with
hand held products or products with no substantial metal
plane. They can even be used with products containing
all plastic chassis or case. The 2.5 dB gain antenna also
compensates for typical system losses that occur at
these frequencies. Connector styles available include
male TNC or SMA. Right angle connector models are
available for side mounting applications. Special connec-
tors are available, please consult factory.
The quarterwave antenna for 2.4 GHz provides en-
hanced performance with the minimum of size. It uses a
hard ABS radome and is colored in black with a textured
finish. The antenna is fitted with a 6-32 thread, but can
be outfitted with other thread sizes (minimum quantities
apply). The ferrule provides the maximum economy for
the antenna as well as the interface needed on the
wireless product. A one time factory matching is recom-
mended for wireless devices with little ground plane.
s Halfwave 2.5 dB gain styles with flexible
radome
s Quarterwave stubby style with hard ABS
radome
s Wireless LAN (2.4 GHz), Wireless Data
Capture & Surveillance applications
s Sleek profile, with a variety of connector
styles
Model Numbers - Straight Antennas
Model
Frequency
Style
Connector
PSTN3-2400S
2.4-2.48 GHz 1/2 wave
SMA
PSTN3-2400T
2.4-2.48 GHz 1/2 wave
TNC
PSTG0-2400HH 2.4-2.48 GHz Stubby
6/32 thread
PSTG0-2400HS 2.4-2.48 GHz Stubby
SMA
Model Numbers - Right Angle Antennas
Model
Frequency
Style
Connector
PSWN3-2400S
2.4-2.48 GHz 1/2 wave
SMA
PSWN3-2400T
2.4-2.48 GHz 1/2 wave
TNC
Other frequency models available upon request. Please
consult factory for details, minimum quantities will
apply. Please reconfirm desired frequency when
ordering.
Whip Material:
1/2 wave
PVC jacket over dipole element
1/4 wave stub
ABS radome over radiator
Connector:
1/2 wave
Male TNC or SMA
1/4 wave stub
6-32 thread stud or Male SMA
Special configurations available upon request,
please consult factory for details.
Product
Specifications
US Office & Headquarters: 3900-B River Road, Schiller Park, IL 60176 Tel: 800-648-2800 or 847-671-6690 Fax: 847-671-6715
UK Office: 106 Anglesey Business Park, Hednesford, Staffs. WS12 5NR UK Tel: (+44) 1543-878343 Fax: (+44) 1543-871714
Visit our web page at www.mobilemark.com. Specifications subject to change without notice (2/2001).