- 您現在的位置：買賣IC網 > PDF目錄69258 > PTQA420033N2AD (TEXAS INSTRUMENTS INC) 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | PTQA420033N2AD |
| 廠商： | TEXAS INSTRUMENTS INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
| 封裝： | LEAD FREE, DIP-8 |
| 文件頁數： | 4/17頁 |
| 文件大?。?/td> | 513K |
| 代理商： | PTQA420033N2AD |
www.ti.com
Using the Remote On/Off Function on the PTQA Series of DC/DC Converters
Negative Output Enable (NEN)
Positive Output Enable (PEN)
SLTS261B – MAY 2006 – REVISED NOVEMBER 2007
For applications requiring output voltage On/Off control, the PTQA series of DC/DC converters incorporate a
Remote On/Off control (pin 2). This feature can be used to switch the module off without removing the applied
input source voltage. When placed in the Off state, the standby current drawn from the input source is typically
reduced to 3 mA.
Models using the negative enable option, the Remote On/Off (pin 2) control must be driven to a logic low voltage
for the converter to produce an output. This is accomplished by either permanently connecting pin 2 to –VI (pin
3), or driving it low with an external control signal. Table 1 shows the input requirements of pin 2 for those
modules with the NEN option.
Table 1. On/Off Control Requirements
for Negative Enable
PARAMETER
MIN
TYP
MAX
VIH
Disable
2.4 V
20 V
VIL
Enable
–0.2 V
0.8 V
Vo/c
Open-Circuit
9 V
15 V
II
Pin 2 at –VI
–0.75 mA
For those models with the positive enable (PEN) option, leaving pin 2 open circuit, (or driving it to an equivalent
logic high voltage), will enable the converter output. This allows the module to produce an output voltage
whenever a valid input source voltage is applied to +VI with respect to –VI. If a logic-low signal is then applied to
pin 2 the converter output is disabled. Table 2 gives the input requirements of pin 2 for modules with the PEN
option.
Table 2. On/Off Control Requirements
for Positive Enable
PARAMETER
MIN
TYP
MAX
VIH
Enable
4.5 V
20 V
VIL
Disable
–0.2 V
0.8 V
Vo/c
Open-Circuit
5 V
7 V
II
Pin 2 at –VI
–0.5 mA
Notes:
1. The Remote On/Off control uses –VI (pin 3) as its ground reference. All voltages are with respect to –VI.
2. An open-collector device (preferably a discrete transistor) is recommended. A pull-up resistor is not required.
If one is added the pull-up voltage should not exceed 20 V.
Caution: Do not use a pull-resistor to +VI (pin 1). The remote On/Off control has a maximum input voltage of
20 V. Exceeding this voltage will overstress, and possibly damage, the converter.
3. The Remote On/Off pin may be controlled with devices that have a totem-pole output. This is provided the
output high level voltage (VOH) meets the module's minimum VIH specified in Table 1. If a TTL gate is used, a
pull-up resistor may be required to the logic supply voltage.
4. The converter incorporates an undervoltage lockout (UVLO). The UVLO keeps the converter off until the
input voltage is close to the minimum specified operating voltage. This is regardless of the state of the
Remote On/Off control. Consult the product specification for the UVLO input voltage thresholds.
12
Copyright 2006–2007, Texas Instruments Incorporated
相關PDF資料 |
PDF描述 |
|---|---|
| PTQA420033P2AZ | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
| PTQA420025P2AD | 1-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE |
| PTQA420025N2AD | 1-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE |
| PTQA420025N2AZ | 1-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE |
| PTQA430050P2AZ | 1-OUTPUT 100 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| PTQA420033N2AS | 制造商:TI 制造商全稱:Texas Instruments 功能描述:100-W 48-V INPUT ISOLATED DC/DC CONVERTER |
| PTQA420033N2AZ | 制造商:TI 制造商全稱:Texas Instruments 功能描述:100-W 48-V INPUT ISOLATED DC/DC CONVERTER |
| PTQA420033P2AD | 制造商:TI 制造商全稱:Texas Instruments 功能描述:100-W 48-V INPUT ISOLATED DC/DC CONVERTER |
| PTQA420033P2AS | 制造商:TI 制造商全稱:Texas Instruments 功能描述:100-W 48-V INPUT ISOLATED DC/DC CONVERTER |
| PTQA420033P2AZ | 制造商:TI 制造商全稱:Texas Instruments 功能描述:100-W 48-V INPUT ISOLATED DC/DC CONVERTER |
發布緊急采購，3分鐘左右您將得到回復。