![](http://datasheet.mmic.net.cn/260000/PVR13_datasheet_15959972/PVR13_1.png)
Data Sheet No. PD 10027D
Series PVR13
Microelectronic Power IC
Dual-Pole, 400mA, 0-100V AC/DC
General Description
The PVR13 Photovoltaic Relay is a dual-pole, normally
open solid state replacement for electro-mechanical
relays. It utilizes as an output switch a unique
bidirectional (AC or DC) MOSFET power IC termed
a BOSFET. The BOSFET is controlled by a photo-
voltaic generator of novel construction, which is
energized by radiation from a dielectrically isolated
light emitting diode (LED).
The PVR overcomes the limitations of reed relays by
offering the solid state advantages of long life, high
operating speed, low pick-up power, bounce-free
operation, low thermal voltages and miniaturization.
These advantages allow product improvement and
design innovations in many applications such as
process control, multiplexing, telecommunications,
automatic test equipment and data acquisition.
The PVR can switch analog signals from thermo-
couple level to 100 volts peak AC or DC polarity.
Signal frequencies into the RF range are easily
controlled and switching rates up to 5kHz are achiev-
able. The extremely small thermally generated offset
voltages allow increased measurement accuracies.
Unique silicon technology developed by International
Rectifier forms the heart of the PVR. The monolithic
BOSFET contains a bidirectional N-channel power
MOSFET output structure. In addition, this power IC
chip has input circuitry for fast turn-off and gate
protection functions. This section of the BOSFET chip
utilizes both bipolar and MOS technology to form
NPN transistors, P-channel MOSFETs, resistors,
diodes and capacitors.
The photovoltaic generator similarly utilizes a unique
International Rectifier alloyed multijunction structure.
The excellent current conversion efficiency of this
technique results in the very fast response of the
PVR microelectronic power IC relay.
This advanced semiconductor technology has cre-
ated a radically new control device. Designers can
now develop switching systems to new standards of
electrical performance and mechanical compactness.
Features
BOSFET Power IC
10
10
Operations
300μsec Operating Time
0.2μVolt Thermal Offset
5 milliwatts Pick-Up Power
1000V/μsec dv/dt
Bounce-Free
16-pin DIP Package
-40°C to 85°C
Part Identification
Part Number
Operating
Voltage (AC/DC)
Off-State
Resistance
10
8
Ohms
PVR1300
0 – 100V
PVR1301
10
10
Ohms
(BOSFET is a trademark of International Rectifier)
Replaced by PVR13N