參數資料
型號: Q24S30015-PS00
廠商: POWER-ONE INC
元件分類: 電源模塊
英文描述: 1-OUTPUT 45 W DC-DC REG PWR SUPPLY MODULE
封裝: MODULE-8
文件頁數: 12/14頁
文件大小: 249K
代理商: Q24S30015-PS00
MCD10057 Rev. 1.1, 23-Aug-10
Page 7 of 14
www.power-one.com
Q24S30015 DC-DC Converter Data Sheet
18-36 VDC Input; 1.5 VDC @ 30A Output
Protection Features
Input Undervoltage Lockout
Input undervoltage lockout is standard with this converter.
The converter will shut down when the input voltage drops
below a pre-determined voltage.
The input voltage must be at least 35 V for the converter to
turn on. Once the converter has been turned on, it will shut
off when the input voltage drops below 31 V. This feature is
beneficial in preventing deep discharging of batteries used in
telecom applications.
Output Overcurrent Protection (OCP)
The converter is protected against overcurrent or short cir-
cuit conditions. Upon sensing an overcurrent condition, the
converter will switch to constant current operation and there-
by begin to reduce output voltage. When the output voltage
drops below 0.7 VDC, the converter will shut down (Fig. 26).
Once the converter has shut down, it will attempt to restart
nominally every 100 ms with a 3% duty cycle (Fig 27). The
attempted restart will continue indefinitely until the overload
or short circuit conditions are removed or the output voltage
rises above 0.7 VDC.
Output Overvoltage Protection (OVP)
The converter will shut down if the output voltage across
Vout(+) (Pin 8) and Vout(-) (Pin 4) exceeds the threshold of
the OVP circuitry. The OVP circuitry contains its own refer-
ence, independent of the output voltage regulation loop.
Once the converter has shut down, it will attempt to restart
every 100 ms until the OVP condition is removed.
Overtemperature Protection (OTP)
The converter will shut down under an overtemperature con-
dition to protect itself from overheating caused by operation
outside the thermal derating curves, or operation in abnor-
mal conditions such as system fan failure. After the conver-
ter has cooled to a safe operating temperature, it will auto-
matically restart.
Safety Requirements
The converters meet North American and International safe-
ty regulatory requirements per UL60950 and EN60950. Ba-
sic Insulation is provided between input and output.
To comply with safety agencies requirements, an input line
fuse must be used external to the converter. A 5-A fuse is
recommended for use with this product.
Electromagnetic Compatibility (EMC)
EMC requirements must be met at the end-product system
level, as no specific standards dedicated to EMC characte-
ristics of board mounted component dc-dc converters exist.
However, Power-One tests its converters to several system
level standards, primary of which is the more stringent
EN55022, Information technology equipment - Radio distur-
bance characteristics - Limits and methods of measurement.
With the addition of a simple external filter (see application
notes), all versions of the Q24S30 converters pass the re-
quirements of Class B conducted emissions per EN55022
and FCC, and meet at a minimum, Class A radiated emis-
sions per EN 55022 and Class B per FCC Title 47CFR, Part
15-J. Please contact Power-One for details of this testing.
相關PDF資料
PDF描述
Q48SK12025NRFH 1-OUTPUT 300 W DC-DC REG PWR SUPPLY MODULE
Q65110A9145 SINGLE COLOR LED, AMBER, 3.25 mm
QAS050Z60-N92V 1-OUTPUT 50 W DC-DC REG PWR SUPPLY MODULE
QBH-171 10 MHz - 150 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
QBH-261 10 MHz - 150 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
相關代理商/技術參數
參數描述
Q24S30015-PS00G 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.5V 30A - Bulk
Q24S30015-PS0P 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.5V 30A 8PIN QUARTER-BRICK - Bulk
Q24S30015-PS0PG 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.5V 30A - Bulk
Q24S30018-NS00G 制造商:Power-One 功能描述:DC/DC PS SGL-OUT 1.8V 30A 8PIN QUARTER-BRICK - Bulk
Q24S30018-NS0P 制造商:Power-One 功能描述:DCDC - Bulk