- 您現在的位置：買賣IC網 > PDF目錄361298 > QLUS3317-PQ208C Telecommunication IC PDF資料下載
參數資料
| 型號： | QLUS3317-PQ208C |
| 英文描述： | Telecommunication IC |
| 中文描述： | 通信集成電路 |
| 文件頁數： | 7/22頁 |
| 文件大?。?/td> | 198K |
| 代理商： | QLUS3317-PQ208C |
QLUS3216-PQ208C Device Data Sheet
7
QLUS3216-PQ208C Device Data Sheet
NOTE:
(O) indicates optional signals.
Table 5: West Utopia Slave Receive Interface
Pin
Mode
Description
wrxclk
In
90MHz receive byte clock. The Core samples all Utopia Receive signals on rxclk
rising edge.
wrxdata[15:0]
Out
Receive data bus.
wrxprty (O)
Out
Receive data bus parity. Standard odd or non standard even parity can be
optionally generated by the Utopia Slave Core.
When the parity generation is disabled during the Core configuration, the pin
rxprty can be let unconnected.
wrxsoc
Out
Receive start of cell. Asserted to indicate that the current word is the first word of
a cell.
wrxenb
In
Active low transmit data transfer enable.
wrxclav[0]
Out
Cell buffer available. Asserted in octet level transfers to indicate to the Master that
the FIFO is almost empty (Active low) or, in cell level transfers, to indicate to the
Master that the PHY port FIFO has space one cell available in the FIFO.
wrxclav[3:1] (O)
Out
Extra FIFO Full / Cell buffer available. In MPHY mode and when direct status
indication is selected, one rxclav signal is implemented per PHY port. The
maximum number of clav signals is limited to four.
wrxaddr(4:0)
In
Utopia receive address. When the Core operates in MPHY mode, address bus
used during polling and slave port selection. Bit 4 is the MSB.
txaddr(4:0) becomes optional (And should be left open) when the Core does not
operate in MPHY mode.
Table 6: East Utopia Slave Transmit Interface
Pin
Mode
Description
etxclk
In
50MHz transmit byte clock. The Core samples all Utopia Transmit signals on txclk
rising edge.
etxdata[15:0]
In
Transmit data bus.
etxprty
In
Transmit data bus parity. Standard odd or non-standard even parity can be
optionally checked by the connected Slave.
When the parity check is disabled during the Core configuration, or not used in
the design, the pin txprty should be left open.
etxsoc
In
Transmit start of cell. Asserted by the Master to indicate that the current word is
the first word of a cell.
etxenb
In
Active low transmit data transfer enable.
etxclav[0]
Out
Cell buffer available. Asserted in octet level transfers to indicate to the Master that
the FIFO is almost full (Active low) or, in cell level transfers, to indicate to the
Master that the PHY port FIFO has space to accept one cell.
etxclav[3:1] (O)
Out
Extra FIFO Full / Cell buffer available. In MPHY mode and when direct status
indication is selected during the Core configuration, one txclav signal is
implemented per PHY port. The maximum number of clav signals is limited
to four.
etxaddr[4:0]
In
Utopia transmit address. When the Core operates in MPHY mode, address bus
used during polling and slave port selection. Bit 4 is the MSB.
txaddr(4:0) becomes optional (And should be left open) when the Core does not
operate in MPHY mode.
相關PDF資料 |
PDF描述 |
|---|---|
| QLUS3317-PT280C | Telecommunication IC |
| QLUS3332-PT280C | Telecommunication IC |
| QLUS3333-PT280C | Telecommunication IC |
| QLUX2108-PT280C | Telecommunication IC |
| QLVDT314-7-1L | Converter IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| QLX1000CSFP0132 | 制造商:Intersil 功能描述:11 GBS SFP+ 1 MTR 32 AWG CBL |
| QLX1000CSFP0532 | 功能描述:CABLE SFP+ ACTIVE 5 METERS RoHS:是 類別:電纜組件 >> 可插式 系列:- 標準包裝:1 系列:- 線纜連接器:SFP+ 位置數:20 連接器類型:插頭至插頭 類型:公型至公型 緊固型:銷鎖，推挽式 特點:有源，拉片 纜線類型:圓形，雙軸 使用:外部 長度:32.80'（10m） 顏色:藍 屏蔽:屏蔽 線規(guī):28 AWG 電流 - 最大/觸點:- 頻率 - 最大:11.1 Gbps 工作溫度:0°C ~ 70°C 產品目錄頁面:323 (CN2011-ZH PDF) |
| QLX1000CSFP0730 | 制造商:Intersil 功能描述:11 GBS SFP+ 7 MTR 30 AWG CBL |
| QLX1000CSFP1028 | 功能描述:CABLE SFP+ ACTIVE 10 METERS RoHS:是 類別:電纜組件 >> 可插式 系列:- 標準包裝:1 系列:- 線纜連接器:SFP+ 位置數:20 連接器類型:插頭至插頭 類型:公型至公型 緊固型:銷鎖，推挽式 特點:有源，拉片 纜線類型:圓形，雙軸 使用:外部 長度:32.80'（10m） 顏色:藍 屏蔽:屏蔽 線規(guī):28 AWG 電流 - 最大/觸點:- 頻率 - 最大:11.1 Gbps 工作溫度:0°C ~ 70°C 產品目錄頁面:323 (CN2011-ZH PDF) |
| QLX1000CSFP1524 | 功能描述:CABLE SFP+ ACTIVE 15 METERS RoHS:是 類別:電纜組件 >> 可插式 系列:- 標準包裝:1 系列:- 線纜連接器:SFP+ 位置數:20 連接器類型:插頭至插頭 類型:公型至公型 緊固型:銷鎖，推挽式 特點:有源，拉片 纜線類型:圓形，雙軸 使用:外部 長度:32.80'（10m） 顏色:藍 屏蔽:屏蔽 線規(guī):28 AWG 電流 - 最大/觸點:- 頻率 - 最大:11.1 Gbps 工作溫度:0°C ~ 70°C 產品目錄頁面:323 (CN2011-ZH PDF) |
發(fā)布緊急采購，3分鐘左右您將得到回復。