'2002.7.3
LOW NOISE 150mA LDO REGULATOR
R1113Z SERIES
Rev. 1.12
- 1 -
I
OUTLINE
The R1113Z Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current,
low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistors,
a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient
response of the R1113Z Series are excellent, thus these ICs are very suitable for the power supply for hand-held
communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is WL-CSP (Wafer Level CSP),
high density mounting of the ICs on boards is possible.
I
FEATURES
l
l
l
l
l
l
l
l
l
l
Ultra-Low Supply Current.............................................. Typ. 100
μ
A
Standby Mode................................................................... Typ. 0.1
μ
A
Low Dropout Voltage...................................................... Typ. 0.23V(I
OUT
=100mA 3.0V Output type)
High Ripple Rejection..................................................... Typ. 80dB(f=1kHz 3.0V Output type)
Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/
°
C
Excellent Line Regulation.............................................. Typ. 0.05%/V
High Output Voltage Accuracy...................................... ±2.0%
Excellent Dynamic Response
Small Package ..................................................................WL-CSP(Wafer Level CSP)
Output Voltage..................................................................Stepwise setting with a step of 0.1V in the range of 1.8V to 5.0V is
possible (1.8V/1.9V Under Development)
Built-in Chip Enable Circuit ( 2 types; A: active low , B: active high)
Built-in Fold Back Protection Circuit...........................Typ. 30mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC
l
l
l
I
APPLICATIONS
l
l
l
Power source for cellular phones such as GSM, CDMA and various kinds of PCS.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.