
R3118x
5
Symbol
Item
Conditions
Min.
Typ.
Max.
Unit
VSENSE
=0V, VDD=6V
0.480
1.450
ISS
Supply Current
*1
VSENSE
=6V, VDD=6V
0.400
1.200
μA
RSENSE
Sense Resistor
VSENSE
=6V, VDD=6V
9
34
58
M
Ω
VDD
=1V, VDOUT=0.1V
0.150
VDD
=3V, VDOUT=0.1V
0.550
VDD
=5V, VDOUT=0.1V
0.850
VDD
=1V, VDOUT=0.4V
0.400
VDD
=3V, VDOUT=0.4V
2.100
Nch
VSENSE
=0V
VDD
=5V, VDOUT=0.4V
3.300
mA
VDD
=1V, VDOUT=0.9V
6
VDD
=3V, VDOUT=2.9V
30
IDOUT
Output Current
(Driver Output Pin)
Pch
*2
VSENSE
=6V
VDD
=5V, VDOUT=4.9V
45
μA
ILEAK
Nch Driver Leakage
Current
*3
VSENSE
=6V, VDD=6V, VDOUT=6V
nA
VSENSE
=6V, VDD=1V, VCD=0.4V
2.200
6.200
VSENSE
=6V, VDD=3V, VCD=0.4V
0.400
1.250
RDIS
CD pin Discharge Tr.
On Resistance
VSENSE
=6V, VDD=5V, VCD=0.4V
0.250
0.800
k
Ω
treset
Detect Output Delay
Time
*4
Topt
=25°C
80
μs
Topt
=25°C
70
100
130
tdelay
Release Output
Delay Time
*5
40°C≤Topt≤85°C
65
100
145
ms
All of unit are tested and specified under load conditions such that Topt
=25°C except for Detector Threshold
Temperature Coefficient, Detector Output Delay Time and Release Output Delay Time.
1: Consumption current through SENSE pin is not included.
2: In case of CMOS type
3: In case of Nch Open Drain type
4: In the case of CMOS output type: In the case that a 0.022μF capacitor is connected to the CD pin, the time
interval from forcing pulsive voltage between -VDET_S×1.155V and -VDET_S×0.9 to SENSE pin, to when the
output voltage of the DOUT pin will reach from "H" to VDD/2.
In the case of Nch Open drain output type: In the case that a 0.022μF capacitor is connected to the CD pin
and the DOUT pin is pulled up to 5V with 470k
Ω, the time interval from forcing pulsive voltage between
-VDET_S
×1.155V and -VDET_S×0.9V to SENSE pin, to when the output voltage reaches from "H" to 2.5V.
5: In the case of CMOS output type: In the case that a 0.022μF capacitor is connected to the CD pin, the time
interval from forcing pulsive voltage between -VDET_S
×0.9 and -VDET_S×1.155V to SENSE pin, to when the
output voltage of the DOUT pin will reach from "L" to VDD/2.
In the case of Nch Open drain output type: In the case that a 0.022μF capacitor is connected to the CD pin
and the DOUT pin is pulled up to 5V with 470k
Ω, the time interval from forcing pulsive voltage between
-VDET_S
×0.9V and -VDET_Sx1.155V to SENSE pin, to when the output voltage reaches from "L" to 2.5V.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.