- 您現在的位置：買賣IC網 > PDF目錄385769 > RF2513 (RF MICRO DEVICES INC) UHF TRANSMITTER PDF資料下載
參數資料
| 型號： | RF2513 |
| 廠商： | RF MICRO DEVICES INC |
| 元件分類： | 通信及網絡 |
| 英文描述： | UHF TRANSMITTER |
| 中文描述： | SPECIALTY TELECOM CIRCUIT, PDSO24 |
| 封裝： | PLASTIC, SSOP-24 |
| 文件頁數： | 4/14頁 |
| 文件大?。?/td> | 321K |
| 代理商： | RF2513 |
11-26
RF2513
Rev B8 010509
11
T
Pin
14
Function
MOD CTRL
Description
This pin is used to select the prescaler modulus. A logic “high” selects
64 or 128 for the prescaler divisor. A logic “l(fā)ow” selects 65 or 129 for
the prescaler divisor.
Interface Schematic
15
DIV CTRL
This pin is used to select the desired prescaler divisor. A logic “high”
selects the 64/65 divisor. A logic low selects the 128/129 divisor.
16
MOD IN
FM analog or digital modulation can be imparted to the VCO through
this pin. The VCO varies in accordance to the voltage level presented
to this pin. To set the deviation to a desired level, a voltage divider refer-
enced to Vcc is the recommended. Because the modulation varactors
are part of the resonator tank, the deviation is slightly dependent upon
the components used in the external tank.
This pin is used to is supply DC bias to the VCO, prescaler, and PLL.
See pin 18.
17
18
VCC2
RESNTR-
The RESNTR pins are used to supply DC voltage to the VCO, as well
as to tune the center frequency of the VCO. Equal value inductors
should be connected to this pin and pin 20.
19
20
21
NC
Not internally connected.
RESNTR+
GND3
See pin 18.
See pin 18.
GND is the ground shared on chip by the VCO, prescaler, and PLL
electronics. Keep traces physically short and connect immediately to
ground plane for best performance.
Loop filter input to VCO.
22
VCO TUNE
23
LOOP FLT
OUT
Output of the charge pump. An RC network from this pin to ground is
used to establish the PLL bandwidth.
24
OSC SEL
A logic high (OSC SEL>2.0V) applied to this pin powers on reference
oscillator 2 and powers down reference oscillator 1. A logic low (OSC
SEL<1.0V) applied to this pin powers on reference oscillator 1 and
powers down reference oscillator 2.
This diode structure is used to provide electrostatic discharge protec-
tion to 3kV using the Human body model. The following pins are pro-
tected: 1-3, 9, 10,12-15, 17, 21-23.
ESD
MOD CTL
DIV CTL
RESNTR-
RESNTR+
4 k
MOD IN
RESNTR-
RESNTR+
4 k
VCO TUNE
LOOP FLT
V
CC
V
CC
相關PDF資料 |
PDF描述 |
|---|---|
| RF2514 | VHF/UHF TRANSMITTER |
| RF2516 | VHF/UHF TRANSMITTER |
| RF2601 | GAIN CONTROLLED IF AMPLIFIER |
| RF2603 | 2.8V PCS UPCONVERTER |
| RF2607 | CDMA/FM RECEIVE AGC AMPLIFIER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| RF2514 | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:VHF/UHF TRANSMITTER |
| RF2514_06 | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:VHF/UHF TRANSMITTER |
| RF2514_1 | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:VHF/UHF TRANSMITTER |
| RF2514PCBA | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:VHF/UHF TRANSMITTER |
| RF2514PCBA-41X | 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:VHF/UHF TRANSMITTER |
發布緊急采購，3分鐘左右您將得到回復。