參數資料
型號： RF2917
廠商： RF MICRO DEVICES INC
元件分類： 通信及網絡
英文描述： 433/868/915MHZ FM/FSK RECEIVER
中文描述： SPECIALTY TELECOM CIRCUIT, PQFP32
封裝： 5 X 5 MM, PLASTIC, LQFP-32
文件頁數： 4/14頁
文件大小： 408K
代理商： RF2917
11-132
RF2917
Rev B2 010118
11
T
Pin
1
Function
VCC1
Description
This pin is used to supply DC bias to the receiver RF electronics. A RF
bypass capacitor should be connected directly to this pin and returned
to ground. A 22pF capacitor is recommended for 915MHz applications.
A 100pF capacitor is recommended for 433MHz applications.
RF input pin for the receiver electronics. RX IN input impedance is a
low impedance when enabled. RX IN is a high impedance when the
receiver is disabled.
Interface Schematic
2
RX IN
3
GND1
Ground connection for RF receiver functions. Keep traces physically
short and connect immediately to ground plane for best performance.
Output pin for the receiver RF low noise amplifier. This pin is an open
collector output and requires an external pull up coil to provide bias and
tune the LNA output. A capacitor in series with this output can be used
to match the LNA to 50
impedance image filters.
GND2 is connection for the 40 dB IF limiting amplifier. Keep traces
physically short and connect immediately to ground plane for best per-
formance.
RF input to the RF Mixer. An LC matching network between LNA OUT
and MIX IN can be used to connect the LNA output to the RF mixer
input in applications where an image filter is not needed or desired.
4
LNA OUT
5
GND2
6
MIX IN
7
8
GND3
MIX OUT
GND3 is the ground connection for the receiver RF mixer.
IF output from the RF mixer. Interfaces directly to 10.7MHz ceramic IF
filters as shown in the application schematic. A pull-up inductor and
series matching capacitor should be used to present a 330
termina-
tion impedance to the ceramic filter. Alternately, an IF tank can be used
to tailor the IF frequency and bandwidth to meet the needs of a given
application. In addition to the matching components, a 15pF capacitor
should be placed from this pin to ground.
Balanced IF input to the 40dB limiting amplifier strip. A 10nF DC block-
ing capacitor is required on this input.
9
IF1 IN-
10
IF1 IN+
Functionally the same as pin 9 except non-inverting node amplifier
input. In single-ended applications, this input should be bypassed
directly to ground through a 10nF capacitor.
DC feedback node for the 40dB limiting amplifier strip. A 100nF bypass
capacitor from this pin to ground is required.
See pin 11.
See pin 9.
11
IF1 BP+
See pin 9.
12
IF2 BP-
See pin 9.
13
IF1 OUT
IF output from the 40dB limiting amplifier. The IF1 OUT output presents
a nominal 330
output resistance and interfaces directly to 10.7MHz
ceramic filters.
14
VREF IF
DC voltage reference for the IF limiting amplifiers (typically 1.1V). A
0.1
μ
F capacitor from this pin to ground is required.
Ground connection for 60dB IF limiting amplifier. Keep traces physically
short and connect immediately to ground plane for best performance.
15
GND5
RX IN
LNA OUT
MIX IN
MIX OUT+
V
CC
IF1 IN-
IF1 IN+
330
330
60 k
60 k
IF1 BP+
IF1 BP-
IF1 OUT
相關PDF資料
PDF描述
RF2919 433/868/915MHZ ASK/OOK RECEIVER
RF2926 UHF DUAL CONVERSION TRANSCEIVER
RF2938 2.4GHZ SPREAD-SPECTRUM TRANSCEIVER
RF2942 UHF QUADRATURE MODULATOR AND TRANSMITTER
RF2945 433/868/915MHZ FSK/ASK/OOK TRANSCEIVER
相關代理商/技術參數
參數描述
RF2919 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:433/868/915MHZ ASK/OOK RECEIVER
RF2926 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:UHF DUAL CONVERSION TRANSCEIVER
RF2926-000 制造商:TE Connectivity 功能描述:FEMTOSMDC005F-2 - Tape and Reel
RF2926PCBA 制造商:RFMD 制造商全稱:RF Micro Devices 功能描述:UHF DUAL CONVERSION TRANSCEIVER
RF2938 制造商:RF Micro Devices Inc 功能描述:Telecommunication IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*