- 您現在的位置：買賣IC網 > PDF目錄373347 > S3921-512Q (Hamamatsu Photonics) MOSFET, Switching; VDSS (V): 500; ID (A): 12; Pch : 30; RDS (ON) typ. (ohm) @10V: 0.515; RDS (ON) typ. (ohm) @4V[4.5V]: -; RDS (ON) typ. (ohm) @2.5V: -; Ciss (pF) typ: 1100; toff (µs) typ: 0.077; Package: TO-220FN PDF資料下載
參數資料
| 型號： | S3921-512Q |
| 廠商： | Hamamatsu Photonics |
| 英文描述： | MOSFET, Switching; VDSS (V): 500; ID (A): 12; Pch : 30; RDS (ON) typ. (ohm) @10V: 0.515; RDS (ON) typ. (ohm) @4V[4.5V]: -; RDS (ON) typ. (ohm) @2.5V: -; Ciss (pF) typ: 1100; toff (µs) typ: 0.077; Package: TO-220FN |
| 中文描述： | NMOS管線性圖像傳感器電壓輸出型電流集成讀出電路和阻抗轉換電路 |
| 文件頁數： | 6/6頁 |
| 文件大小： | 244K |
| 代理商： | S3921-512Q |
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho,
Higashi-ku,
Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.:
19
, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesv
gen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 200
5
Hamamatsu Photonics K.K.
NMOS linear image sensor
S3921/S3924 series
Cat. No. KMPD1044E01
Oct
. 200
5
DN
Vss
Vsub
NC
EOS
EOS
10 k
+5 V
+5 V
+
–
OPEN
DUMMY
VIDEO
ACTIVE
VIDEO
Reset
+2.5 V
Reset V
+
+
+15 V
Rs 10 k
Rf
Vdd
st
2
1
st
2
1
Reset
Reset
st
2
1
I
Anti-blooming function
If the incident light intensity is higher than the saturation charge level, even partially, a signal charge in excess of the saturation
charge cannot accumulate in the photodiode. This excessive charge flows out into the video line degrading the signal purity. To
avoid this problem and maintain the signal purity, applying the same voltage as the Reset V voltage to the saturation control drain
and grounding the saturation control gate are effective. If the incident light intensity is extremely high, a positive bias should be
applied to the saturation control gate. The larger the voltage applied to the saturation control gate, the higher the function for
suppressing the excessive saturation charge will be. However, this voltage also lowers the amount of saturation charge, so an
optimum bias voltage should be selected.
I
Auxiliary functions
1) All reset
In normal operation, the accumulated charge in each photodiode is reset when the signal is read out. Besides this method that
uses the readout line, S3921/S3924 series can reset the photodiode charge by applying a pulse to the saturation control gate.
The amplitude of this pulse should be equal to the
φ
1,
φ
2,
φ
st, Reset
φ
pulses and the pulse width should be longer than 5
μ
s.
When the saturation control gate is set at the
“
High
”
level, all photodiodes are reset to the saturation control drain potential.
Conversely, when the saturation control gate is set at the
“
Low
”
level (0 V), the signal charge accumulates in each photodiode
without being reset.
2) Dummy video
S3921/S3924 series have a dummy video line. Positive-polarity video signals with the DC offset remove can be obtained by
differential amplification of the active video line and dummy video line outputs. When not needed, leave this unconnected.
I
Precautions for using NMOS linear image sensors
1) Electrostatic countermeasures
NMOS linear image sensors are designed to resist static electrical charges. However, take sufficient cautions and countermea-
sures to prevent damage from static charges when handling the sensors.
2) Window
If dust or grime sticks to the surface of the light input window, it appears as a black blemish or smear on the image. Before using
the image sensor, the window surface should be cleaned. Wipe off the window surface with a soft cloth, cleaning paper or
cotton swab slightly moistened with organic solvent such as alcohol, and then lightly blow away with compressed air. Do not
rub the window with dry cloth or cotton swab as this may generate static electricity.
KMPDC0027EA
KMPDC0028EA
!
&10
,
@
,;--
> !!!
6!!
,;--A
,;--),-'#
> !
)
B! 2
,-'#
,;--
,
-*
,;--C,;--
B1,8
@D3!!!8
Hamamatsu provides the following driver circuits and related products (sold separately).
相關PDF資料 |
PDF描述 |
|---|---|
| S3924-256Q | NMOS linear image sensor Voltage output type with current-integration readout circuit and impedance conversion circuit |
| S3931 | POSITION SENSITIVE DETECTOR |
| S3270 | POSITION SENSITIVE DETECTOR |
| S3271-05 | POSITION SENSITIVE DETECTOR |
| S3272-05 | POSITION SENSITIVE DETECTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S3924-256Q | 制造商:Hamamatsu Photonics 功能描述:Bulk |
| S3924-512Q | 制造商:HAMAMATSU 制造商全稱:Hamamatsu Corporation 功能描述:NMOS linear image sensor Voltage output type with current-integration readout circuit and impedance conversion circuit |
| S3925 | 制造商:Hubbell Premise Wiring 功能描述:Cable Accessories Cover Brass 制造商:Hubbell Wiring Device-Kellems 功能描述:F-BOX CVR, RND, DUP FLAP, BRS |
| S392D | 制造商:VISHAY 制造商全稱:Vishay Siliconix 功能描述:Silicon PIN Diode |
| S392D_05 | 制造商:VISHAY 制造商全稱:Vishay Siliconix 功能描述:RF PIN Diode - Dual in SOT-23 |
發布緊急采購，3分鐘左右您將得到回復。