Philips Semiconductors
Product specification
83C752/87C752
80C51 8-bit microcontroller family
2K/64 OTP/ROM, 5 channel 8 bit A/D, I
2
C, PWM, low pin count
2
1998 May 01
853-1443 19328
DESCRIPTION
The Philips 83C752/87C752 offers many of the advantages of the
80C51 architecture in a small package and at low cost.
The 8XC752 Microcontroller is fabricated with Philips high-density
CMOS technology. Philips epitaxial substrate minimizes CMOS
latch-up sensitivity.
The 8XC752 contains a 2k
×
8 ROM (83C752) EPROM (87C752), a
64
×
8 RAM, 21 I/O lines, a 16-bit auto-reload counter/timer, a
fixed-priority level interrupt structure, a bidirectional inter-integrated
circuit (I
2
C) serial bus interface, an on-chip oscillator, a five channel
multiplexed 8-bit A/D converter, and an 8-bit PWM output.
The onboard inter-integrated circuit (I
2
C) bus interface allows the
8XC752 to operate as a master or slave device on the I
2
C small
area network. This capability facilitates I/O and RAM expansion,
access to EEPROM, processor-to-processor communication, and
efficient interface to a wide variety of dedicated I
2
C peripherals.
The EPROM version of this device, the 87C752, is available in both
quartz-lid erasable and plastic one-time programmable (OTP)
packages. Once the array has been programmed, it is functionally
equivalent to the masked ROM 83C752. Thus, unless explicitly
stated otherwise, all references made to the 83C752 apply equally
to the 87C752.
The 83C752 supports two power reduction modes of operation
referred to as the idle mode and the power-down mode.
FEATURES
Available in erasable quartz lid or One-Time Programmable plastic
packages
80C51 based architecture
Inter-integrated Circuit (I
2
C) serial bus interface
Small package sizes
–
28-pin DIP
–
28-pin PLCC
–
28-pin SSOP
Wide oscillator frequency range
Low power consumption:
–
Normal operation: less than 11mA @ 5V, 12MHz
–
Idle mode
–
Power-down mode
2k
×
8 ROM (83C752)
EPROM (87C752)
64
×
8 RAM
16-bit auto reloadable counter/timer
5-channel 8-bit A/D converter
8-bit PWM output/timer
Fixed-rate timer
Boolean processor
CMOS and TTL compatible
Well suited for logic replacement, consumer and industrial
applications
PART NUMBER SELECTION
ROM
EPROM
TEMPERATURE RANGE
°
C
AND PACKAGE
FREQUENCY
DRAWING
NUMBER
S83C752–1DB
S87C752–1DB
OTP
0 to +70, 28-pin Plastic Shrink Small Outline Package
3.5 to 12MHz
SOT341-1
S83C752–1N28
S87C752–1N28
OTP
0 to +70, 28-pin Plastic Dual In-line Package
3.5 to 12MHz
SOT117-2
S83C752–2N28
S87C752–2N28
OTP
–40 to +85, 28-pin Plastic Dual In-line Package
3.5 to 12MHz
SOT117-2
S83C752–4DB
S87C752–4DB
OTP
0 to +70, 28-pin Plastic Shrink Small Outline Package
3.5 to 16MHz
SOT341-1
S83C752–4N28
S87C752–4N28
OTP
0 to +70, 28-pin Plastic Dual In-line Package
3.5 to 16MHz
SOT117-2
S83C752–5N28
S87C752–5N28
OTP
–40 to +85, 28-pin Plastic Dual In-line Package
3.5 to 16MHz
SOT117-2
S83C752–1A28
S87C752–1A28
OTP
0 to +70, 28-pin Plastic Leaded Chip Carrier
3.5 to 12MHz
SOT261-3
S83C752–2A28
S87C752–2A28
OTP
–40 to +85, 28-pin Plastic Leaded Chip Carrier
3.5 to 12MHz
SOT261-3
S83C752–4A28
S87C752–4A28
OTP
0 to +70, 28-pin Plastic Leaded Chip Carrier
3.5 to 16MHz
SOT261-3
S83C752–5A28
S87C752–5A28
OTP
–40 to +85, 28-pin Plastic Leaded Chip Carrier
3.5 to 16MHz
SOT261-3
S83C752–6A28
S87C752–6A28
OTP
–55 to +125, 28-pin Plastic Leaded Chip Carrier
3.5 to 12MHz
SOT261-3
S83C752–6N28
NOTE:
1. OTP = One Time Programmable EPROM.
S87C752–6N28
OTP
–55 to +125, 28-pin Plastic Dual In-line Package
3.5 to 12MHz
SOT117-2