- 您現在的位置：買賣IC網 > PDF目錄373357 > S9295-01 (Hamamatsu Photonics) Large area photodiode integrated with op amp and TE-cooler PDF資料下載
參數資料
| 型號： | S9295-01 |
| 廠商： | Hamamatsu Photonics |
| 英文描述： | Large area photodiode integrated with op amp and TE-cooler |
| 中文描述： | 大面積光電二極管集成運算放大器和TE冷卻器 |
| 文件頁數： | 4/4頁 |
| 文件大小： | 127K |
| 代理商： | S9295-01 |
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho,
Higashi-ku,
Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.:
19
, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesv
gen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 200
4
Hamamatsu Photonics K.K.
Si photodiode with preamp
S9295 series
Cat. No. KSPD1064E01
Dec. 2004 DN
Precautions for use
I
ESD
S9295 series may be damaged or their performance may deteriorate by such factors as electro static discharge from the
human body, surge voltage from measurement equipment, leakage voltages from soldering irons and packing materials. As a
countermeasure against electro static discharge, the device, operator, work place and measuring jigs must all be set at the
same potential. The following precautions must be observed during use:
strap or similar tools to ground the operator,s body via a high impedance resistor (1 M
).
A semiconductive sheet (1 M
to 10 M
) should be laid on both the work table and the floor in the work area.
When soldering, use an electrically grounded soldering iron with an isolation resistance of more than 10 M
.
For containers and packing, use of a conductive material or aluminum foil is effective. When using an antistatic material, use
one with a resistance of 0.1 M
/cm
2
to 1 G
/cm
2
.
I
Strength
Thermoelectrically-cooler devices may be damaged if subjected to shock, for example drop impact. Take sufficient care
when handling these devices.
I
Lead forming
When forming the leads, take care not to apply excessive force to the lead sealing glass. Excessive force may impair the
hermetic sealing, possibly degrading the cooling capacity.
To form the leads, hold the roots of the leads securely with a pair of pliers and bend them.
I
Heatsink
Use a heatsink with thermal resistance less than 1.3 °C/W. Apply thermal grease between the heatsink and detector
package, and then fasten them with the screws. Be careful not to give any excessive force or mechanical stress to the
detector package at this point.
I
Wiring
Be careful not to misconnect the plus and minus leads of the thermoelectric cooler or preamplifier. Supplying a voltage or
current while these connections are reversed may damage the device.
The feedback resistor integrated into S9295 series is high so it is susceptible to external noise. Always ground the case
terminal when using S9295.
4
相關PDF資料 |
PDF描述 |
|---|---|
| S9318 | Nonvolatile DACPOT⑩ Electronic Potentiometer With Up/Down Counter Interface |
| S9318S | Nonvolatile DACPOT⑩ Electronic Potentiometer With Up/Down Counter Interface |
| S9345 | Si PIN photodiode Dual-element photodiode using newly developed small, thin package |
| S93662 | Voltage Monitor and Reset Controller |
| S93662PA | Voltage Monitor and Reset Controller |
相關代理商/技術參數 |
參數描述 |
|---|---|
| S92WGST_J309 WAF | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| S92WGST_J310 WAF | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| S93-0406140-D04 | 制造商:Micro-Star International 功能描述:PART FOR 90W ADAPTER - Bulk |
| S93-0606001-E11 | 制造商:Micro-Star International 功能描述:POWER SUPPLY FOR MS-6215 - Bulk |
| S93-1009023-D04 | 制造商:Micro-Star International 功能描述:POWER SUPPLY FOR MS-6279-040 - Bulk |
發布緊急采購，3分鐘左右您將得到回復。