參數資料
型號： SC16C754IB80
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： Quad UART with 64-byte FIFO
中文描述： 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP80
封裝： 12 X 12 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-315-1, LQFP-80
文件頁數： 1/49頁
文件大?。?/td> 622K
代理商： SC16C754IB80
SC16C754
Quad UART with 64-byte FIFO
Rev. 04 — 19 June 2003
Product data
1.
Description
The SC16C754 is a quad universal asynchronous receiver/transmitter (UART) with
64-byte FIFOs, automatic hardware/software flow control, and data rates up to
5 Mbits/s (3.3 V and 5 V). The SC16C754 offers enhanced features. It has a
transmission control register (TCR) that stores receiver FIFO threshold levels to
start/stop transmission during hardware and software flow control. With the FIFO
RDY register, the software gets the status of TXRDY/RXRDY for all four ports in one
access. On-chip status registers provide the user with error indications, operational
status, and modem interface control. System interrupts may be tailored to meet user
requirements. An internal loop-back capability allows on-board diagnostics.
The UART transmits data, sent to it over the peripheral 8-bit bus, on the TX signal and
receives characters on the RX signal. Characters can be programmed to be 5, 6, 7, or
8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be
programmed to interrupt at different trigger levels. The UART generates its own
desired baud rate based upon a programmable divisor and its input clock. It can
transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect
break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can
detect FIFO underflow. The UART also contains a software interface for modem
control operations, and has software flow control and hardware flow control
capabilities.
The SC16C754 is available in plastic LQFP80 and PLCC68 packages.
2.
Features
I
Pin compatible with SC16C654IA68 and SC16C554IA68 with additional
enhancements
I
Up to 5 Mbits/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is
3 Mbits/s)
I
64-byte transmit FIFO
I
64-byte receive FIFO with error flags
I
Programmable and selectable transmit and receive FIFO trigger levels for DMA
and interrupt generation
I
Software/hardware flow control
N
Programmable Xon/Xoff characters
N
Programmable auto-RTS and auto-CTS
I
Optional data flow resume by Xon any character
I
DMA signalling capability for both received and transmitted data
I
Supports 5 V, 3.3 V and 2.5 V operation
I
Software selectable baud rate generator
相關PDF資料
PDF描述
SC2000 Universal Timeslot Interchange
SC2001G-10 Bus Exchanger
SC2001G-13 Bus Exchanger
SC2344 BJT
SC26C94 Quad universal asynchronous receiver/transmitter QUART
相關代理商/技術參數
參數描述
SC16C754IB80,528 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C754IB80,551 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C754IB80,557 功能描述:UART 接口集成電路 16C 2.5V-5V 4CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C850 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or 68 mode parallel bus interface
SC16C850IBS 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or 68 mode parallel bus interface
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*