• 參數資料
    型號: SD-14595D3-232Y
    廠商: DATA DEVICE CORP
    元件分類: 位置變換器
    英文描述: SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, DIP36
    封裝: DDIP-36
    文件頁數: 7/14頁
    文件大?。?/td> 416K
    代理商: SD-14595D3-232Y
    2
    SD-14595/96/97 SPECIFICATIONS
    Specifications apply over temperature range, power supply range, ref-
    erence frequency, and amplitude range; 15% signal amplitude varia-
    tion, up to 10% harmonic distortion in the reference, and up to 45° of
    signal to reference phase shift.
    PARAMETER
    UNIT
    VALUE
    RESOLUTION
    Bits
    14 or 16
    REPEATABILTY
    LSB
    1 Max
    REFERENCE INPUT
    CHARACTERISTICS
    Carrier Frequency Range
    Voltage Range
    Input Impedance:
    n Single Ended
    n Differential
    Common Mode Range
    Hz
    Vrms
    Ohm
    V
    ACCURACY
    Min
    5.2, 2.6, or 1.3
    DIGITAL INPUT/OUTPUT
    Logic Type
    Inputs:
    Inhibit (INH)
    SIGNAL INPUT
    CHARACTERISTICS
    (voltage options and minimum
    input impedance)
    Input Impedance Imbalance
    n Synchro
    Zin Line-to-Line
    Zin Each Line-to-Gnd
    Common Mode Range
    Maximum Transient Peak
    Voltage
    n Resolver
    Zin Single Ended
    Zin Differential
    Zin Each Line-to Gnd
    Common Mode Range
    Maximum Transient Peak
    Voltage
    n Direct (1.0 V L-L)
    Input Signal Type
    Sin/Cos Voltage Range
    Max Voltage w/o Damage
    Input Impedance
    REFERENCE SYNTHESIZER
    ± Sig/Ref Phase Shift
    0.2 max
    11.8 V L-L 90 V L-L
    17.5k
    130k
    11.5k
    85k
    30
    180
    150
    11.8 V L-L
    23k
    46k
    23k
    60 max
    150
    Sin and Cos resolver sig-
    nals referenced to converter
    internal DC reference V.
    1 V nominal, 1.15 V max
    15 V continuous
    100 V Peak Transient
    Zin > 20M // 10 pf voltage
    follower
    60 typ, 45 guaranteed
    TTL/CMOS compatible
    Logic 0 = 0.8 V max
    Logic 1 = 2.0 V min
    Loading = 30 A max
    Logic 0 inhibits Data stable
    within 0.5 s (pull up)
    47-1000 (60 Hz Unit)
    360-1000 (400 Hz Unit)
    4-130 (for 11.8 Vor 90 V sig-
    nal input)
    3-100 (for 1 V direct signal input)
    250k min
    500k min
    250 peak max
    %
    V
    Ohm
    Vpeak
    V
    Ohm
    V
    Vrms
    Ohm
    Deg
    PARAMETER
    UNIT
    VALUE
    DIGITAL INPUT/OUTPUT
    (cont)
    Resolution Control (14B)
    (for Programmable Units Only)
    Enable Bits 1 to 8 (HBE)
    Enable Bits 9 to 16 (LBE)
    (9 to 14 for 14-bit mode)
    Outputs:
    Parallel Data
    Converter Busy (CB)
    BIT
    Drive Capability
    Bits
    Logic 1 for 14 bits
    Logic 0 for 16 Bits
    Pull-up current source to
    +5 V//5 pF max CMOS
    transient protected
    Logic 0 enables
    Data Valid within 150 ns
    Logic 1 = High Z
    Data High Z within 100 ns
    Pull-down current source
    to GND//5 pF max CMOS
    transient protected
    14 or 16 parallel lines;
    natural binary angles, posi-
    tive logic (see TABLE 3)
    0.8 to 3.0 s positive pulse;
    leading edge initiates
    counter update.
    Logic 1 for fault conditions.
    50 pF + rated logic drive
    Logic 0; 1 TTL load,
    1.6 mA at 0.4 V max
    Logic 1; 10 TTL loads,
    0.4 mA at 2.8 V min High
    Z;10 A//5 pF max
    Logic 0; 100 mV max
    driving CMOS
    Logic 1; +5 V supply
    minus 100 mV min
    driving CMOS
    DYNAMIC CHARACTERISTICS
    See TABLE 6
    PHYSICAL CHARACTERISTICS
    in
    (mm)
    oz(g)
    .9 x 0.78 x 0.21
    (48 x 20 x 5.3 )
    36-Pin Double Dip
    0.7 max (20)
    TEMPERATURE
    RANGES
    Operating (-1XX or -4XX)
    (-3XX or -8XX)
    Storage
    °C
    -55 to +125
    0 to 70
    -65 to +150
    POWER SUPPLY
    CHARACTERISTICS
    Nominal Voltage
    Voltage Tolerance
    Max Voltage w/o Damage
    Current
    V
    %
    V
    mA
    +5
    ±10
    +7
    25 max+digital output load
    TABLE 1. SD-14595/96/97 SPECIFICATIONS (CONT)
    ANALOG OUTPUT
    Analog Return (V)
    Velocity (VEL) (See note 3.)
    AC error (e)
    n 14-Bit Mode
    n 16-Bit Mode
    Load
    mVrms
    mA
    +4.3 V nom
    See TABLE 4.
    3.5 per LSB of error
    1.75 per LSB of error
    1
    相關PDF資料
    PDF描述
    SD-14595D3-232Z SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, DIP36
    SD-14595D3-232 SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, DIP36
    SD-14595D3-234Q SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, DIP36
    SD-14595D3-234S SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, DIP36
    SD-14595D3-234 SYNCHRO OR RESOLVER TO DIGITAL CONVERTER, DIP36
    相關代理商/技術參數
    參數描述
    SD-14595D3-302 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Synchro-to-Digital Converter
    SD-14595D3-304 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Synchro-to-Digital Converter
    SD-14595D3-305 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Synchro-to-Digital Converter
    SD-14595F1-102 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Synchro-to-Digital Converter
    SD-14595F1-104 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Synchro-to-Digital Converter