
Luton Road, Dunstable, Bedfordshire LU5 4LJ England
Telephone: 01582 662241 Fax: 01582 600767
E-mail: info@erg.co.uk http://www.erg.co.uk
Spectra
Low
P
rofile
Edge
Mount
at 20C 70% R.H.
Contact Ratings: Non Switching: 100Vac, 5A.
Switching: 1V to 100V, 1A to 1, 10A.
Initial Contact Resistance: (at 10mV, 10mA max).
Typical: 10m.
Insulation Resistance: (at 500 Vdc min.) 10,000M.
Life: Mechanical wear out of the sliding actuator is usually
observed after 10,000 operations.
Dielectric Strength: 1 minute: 500Vrms 50Hz.
Capacitance Between Open Contacts: < 1pf at 1KHz.
This leaflet is believed to contain the best information available at the time of printing, but is
subject to change without notice. Performance figures, where quoted, are actually estimates
based on our experience or that of our customers or statutory authorities. In common with all
components reliability varies with many factors, and users are invited to contact us in
appropriate cases so that where relevant information is available it may be considered by the
user. All supplies are subject to the Company’s standard conditions of sale which are available
on request.
Principal Electrical and Performance Data
Dual in line
(centre common pin)
2 x s.p.d.t.
SCS2-015
Single in line
(centre common pin)
1 x s.p.d.t.
SCS-1-017
1 x s.p.d.t.
SCLS-1-017
(Flush slider)
1 x d.p.d.t.
SCS-1G2-015
PCB drilling matrix
Temperature: Operating range for continuous electrical use
and manual operation is restricted to 55C to +85C for standard
products.
Operating Force per pole: Typical: 4N.
Humidity: BS 2011 Test Ca: 56 days.
Solderability: < 2 seconds to wet at 235C as per IEC 68 and
BS 2011 Test T, solder bath method. We recommend that these
switches are post fitted after PCB cleaning has been carried out.
Resistance to soldering heat as per IEC 68 and BS 2011 10
seconds satisfactory at 260C when mounted on 1.5mrn PCB.
Single in line
1 x s.p.s.t.
SDS-1-017
1 x s.p.s.t.
SDLS-1-017
(Flush slider)
2 x s.p.s.t.
SDS2-015
Changeover Contacts
On/Off Contacts
1mm holes
pin centres
2.54 (0.1”)
4.1
3.81
2.4mm
dia
1mm holes
pin centres
2.54 (0.1”)
2.54
4.1
3.81
10.5mm
12.5
8
3
6
8
3
6
9.6
3
6
9.6
3
6
9.6
5.1
4.1
10.5mm
6.0
5.1
6.0
4.1
2.54
14.9
5.1
6.0
4.1
2.54
2.4mm
dia
Erg Spectra 015 & 017
21/10/03
4:35 pm
Page 2