![](http://datasheet.mmic.net.cn/390000/SF1092A_datasheet_16833578/SF1092A_6.png)
199 MHz SAW Filter
RF Monolithics, Inc.
RFM Europe
2001 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
Phone: (972) 233-2903
Phone: 44 1963 251383
Fax: (972) 387-8148
Fax: 44 1963 251510
E-mail: info@rfm.com
http://www.rfm.com
SF1092A-100605
Page 6 of 9
Additional items
(1) Cover tape peeling strength
The cover tape shall be adhered evenly to the carrier tape along both sides in the pulling direction.
The cover tape peeling strength shall be as follows for an angle between the cover tape and the pulling
direction of 165° to 180° (see the figure) and a peeling speed of 300mm/min. ±10mm/min.
[EIA-481] 0.1N to 1.3N for a tape width of 12 to 56mm
Tape material
(1) Carrier tape [anti-charging treatment: carbon used] Surface resistivity: 1 x 10
8
or less
Material: Polystyrene or Polycarbonate
(2) Cover tape material: Polyester (anti-charging treated) Surface resistivity: 1 x 10
12
or less
t = 50 to 100μm width = 13.3mm
Warranty periods
Cover tape peeling strength and mounting performance of stored components.
2-1. Cover tape peeling strength: One year after delivery (Peeling strength: 0.1N to 1.3N)
Number of missing components
There shall not be two or more consecutive missing components. Also, the maximum number of missing
components shall be the larger of one piece or 0.1%.
Storage environment
Keep the product on which taping has been performed to a temperature below 40°C and a humidity within
80% RH. Do not subject in the direct sun.
Fixing method
1. Insert the tip of the carrier tape into the groove.
2. Fix the tip of the cover tape with adhesive tape.