
SFH 530
2000-12-18
5
Ultraviolet Selective Sensor
Allgemeines
Der SFH 530, ein ultraviolett (UV)-selektiver opti-
scher Sensor, wurde speziell für die hohen Anfor-
derungen an die Flammenüberwachung in l-
brennern (Blaubrenner) entwickelt und ist für viele
weitere anspruchsvolle Meaufgaben im Bereich
der UV-Detektion einsetzbar. Die Fotodiode und
die Verstrkerschaltung (Verstrkung des Foto-
stromes, Umsetzung in ein Spannungssignal) be-
finden sich in einem hermetisch dichten TO-39
Gehuse mit drei Anschlupins (GND,
V
s: Be-
triebsspannung,
V
OUT: Ausgangsspannung). Das
Gehuse bietet besonderen Schutz vor Strungen
durch elektromagnetische Felder und vor Feuch-
tigkeit über den gesamten Betriebstemperaturbe-
reich von – 40
°C bis + 85 °C.
Optisches Verhalten
Das optische Verhalten des SFH 530 wird durch
die Kombination aus einer UV-durchlssigen
Sammellinse, einem UV-Filterglas und einer Si-
Fotodiode mit hoher Selektivitt für UV-Strahlung
bestimmt. Die Selektivitt im Wellenlngenbereich
von 290 nm bis 350 nm wird durch eine definierte
Dotierung der Fotodiode und ein aufgedampftes
Interferenzfilter erreicht. Dadurch wird der Einflu
sichtbarer und infraroter Strahlung auf das Nutzsi-
gnal stark unterdrückt. Die Empfindlichkeit für
Wellenlngen
≥ 400 nm ist stets kleiner als ein
Zehntausendstel der maximalen Empfindlichkeit
bei ca. 310 nm.
Ultraviolet Selective Sensor
General
The SFH 530, an ultraviolet (UV) selective optical
sensor has been specially developed for the ex-
acting requirements placed on flame monitoring in
oil burners and can be used for many other impor-
tant measuring tasks in the UV detection area. The
photodiode and the amplifier circuit (amplification
of the photocurrent, conversion to a voltage signal)
are housed in a hermetically sealed TO-39 pack-
age with three terminal pins (GND,
V
s: operating
voltage,
V
OUT: output voltage). The package is
specially protected against electromagnetic inter-
ference and moisture over the entire operating
temperature range of – 40
°C to + 85 °C.
Optical Characteristics
The optical behavior of the SFH 530 is determined
by the combination of a UV-permeable focusing
lens, a UV filter glass and a Si photodiode with
high selectivity for UV radiation. The selectivity in
the wavelength range 290 to 350 nm is achieved
by means of a defined doping of the photodiode
and a vapor-deposited interference filter. This
heavily suppresses the effect of visible and infra-
red radiation on the signal. The sensitivity to wave-
lengths
≥ 400 nm is always less than one ten-thou-
sandth
of
the
maximum
sensitivity
at
approximately 310 nm.