- 您現在的位置：買賣IC網 > PDF目錄372144 > SHC5320KP High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER PDF資料下載
參數資料
| 型號： | SHC5320KP |
| 元件分類： | 運動控制電子 |
| 英文描述： | High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER |
| 中文描述： | 高速，雙極，單片采樣/保持放大器 |
| 文件頁數： | 9/10頁 |
| 文件大小： | 87K |
| 代理商： | SHC5320KP |
9
SHC5320
FIGURE 10. PAM Output.
Hold
Sample
Mode
Control
Analog Input
PAM Output
DATA DISTRIBUTION
The SHC5320 may be used to hold the output of a digital-
to-analog converter and distribute several different analog
voltages to different loads (see Figure 11).
HIGH-SPEED DATA ACQUISITION
The minimum sample time for one channel in a data acqui-
sition system is usually considered to be the acquisition time
of the sample/hold plus the conversion time of the A/D
converter. If two or more sample/holds are used with a
multiplexer (such as the Burr-Brown MPC800 or MPC801)
as shown in Figure 12, the acquisition time of the sample/
hold can be virtually eliminated. While the first channel is in
hold and switched into the A/ D converter, the multiplexer
may be addressed to the next channel. The second sample/
hold will have acquired this signal by the time the conver-
sion is complete. Then, the sample/holds reverse roles and
another channel is addressed. In low level systems an instru-
mentation amplifier (such as the Burr-Brown INA101) and
a differential multiplexer (such as the Burr-Brown MPC509A
or MPC507A) may be required in front of the sample/hold.
The settling and acquisition times of the multiplexer, instru-
mentation amplifier, and sample/hold can be eliminated
from the total conversion time as before by operating in this
overlapped mode with the sample/holds.
Additional
SHC5320
Units
D/A
Converter
Parallel
Inputs
Digital
Inputs
Mode
Control
Logic
SHC5320
1
2
14
6
Analog
Outputs
Channel 1
SHC5320
2
14
6
Channel 2
SHC5320
1
2
14
6
Channel N
Signal
Common
7
7
7
FIGURE 11. Typical Data Distribution Configuration.
相關PDF資料 |
PDF描述 |
|---|---|
| SHC5320SH | High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER |
| SHC5320KU | High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER |
| SHC5320 | High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER |
| SHC5320KH | High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER |
| SHC605 | High-Speed Operational TRACK-AND-HOLD AMPLIFIER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SHC5320KU | 制造商:BB 制造商全稱:BB 功能描述:High-Speed, Bipolar, Monolithic SAMPLE/HOLD AMPLIFIER |
| SHC5320SH | 功能描述:采樣&保持放大器 HS BiPolar Mono RoHS:否 制造商:Texas Instruments 通道數量:2 捕獲時間:20 us 電源電壓-最大:18 V 最大工作溫度:+ 85 C 最小工作溫度:- 25 C 安裝風格: 封裝 / 箱體:SOIC-14 封裝:Tube |
| SHC536 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic |
| SHC540 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic |
| SHC556 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic |
發布緊急采購，3分鐘左右您將得到回復。