SM13T, SM13TS Crystal
4 Pad 7x5mm Surface Mount Crystal (Metal Cover Seam Sealed to Ceramic Base)
SM13TS Specifically Designed for High Shock Applications
Solder Pad Compatible with our SM13H
Standard Specifications
Calibration Frequency Tolerance at 25 C
± 50 PPM is standard, tighter tolerances available
Operating Temperature Range (OTR)
0 to +70°C is standard, but can be extended to -40 to +85°C
Frequency Stability (FS) over OTR
± 50 PPM is standard, tighter tolerances available
Drive Level
100 mW is standard, customer may specify
Aging at 25°C
± 3 PPM maximum
Oscillation
Maximum
Frequency Range
6.001 – 8.000
Fundamental
AT Cut
150
8.001 – 9.000
80
3rd Overtone
AT Cut
Consult factory for available frequencies and specs.
Consult factory for lower ESR
°
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
33
Pl tronics, Inc.
Mechanical: inches (mm)
not to scale
Mode
(MHz)
ESR (Ohms)
Not all options available for all frequencies. A special part number may be assigned.
6.001 MHz – 80.000 MHz
9.001 – 11.000
40
11.001 – 50.000
30
26.000 – 80.000
80
Feb 2005
Solder Pads
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
MAX
.276
(7.0
±
.2)
.051 (1.3)
.197 (5.0 ± .2)
.055 (1.4)
.079 (2.0)
.161
(4.1)
PLE
.043 (1.1)
.100 (2.54)
PLE
Mechanical Shock
5000 g's, 1/2 sine, 0.2 mS
Drop Test
2 meter free fall onto a concrete floor, 10 times
SM13TS Only
Pl tronics, Inc.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
.
Portions of the part number that appear after the frequency may not
be marked on part (C of C provided)
Model
Frequency in MHz
Temperature Range
SM13TS B E - xx - 70.0M - XXX (Internal Code or blank)
Load Capacitance
Parallel Resonance in pF ( 10 pF)
SR = Series Resonance
Blank: 0 to +70°C
E: - 40 to +85°C
H: - 20 to +70°C
Cal Tol / Freq Stability
Blank = 50/50
A = 30/50
B = 30/30
C = 15/30
D = 10/20 (consult factory)
SM13T: Standard
SM13TS: High Shock
Recommend connecting
Case pads to GND
Part Numbering Guide
ESR Values
Packaging
16mm tape
12mm pitch
CASE