參數資料
型號： SP233EET
元件分類： RS-232
英文描述： 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors
中文描述： 5V的高速RS - 232收發器與0.1uF電容
文件頁數： 10/15頁
文件大?。?/td> 126K
代理商： SP233EET
Rev. 06/20/02
SP202E Series High Performance RS232 Transceivers
Copyright 2002 Sipex Corporation
10
SP202E
Family
HUMAN BODY
MODEL Air Discharge Direct Contact Level
IEC1000-4-2
Driver Outputs
Receiver Inputs
±
15kV
±
15kV
±
15kV
±
15kV
±
8kV
±
8kV
4
4
Figure 11. ESD Test Waveform for IEC1000-4-2
t=0ns
t=30ns
0A
15A
30A
t
i
Table 2. Transceiver ESD Tolerance Levels
discharge current rather than the discharge
voltage. Variables with an air discharge such as
approach speed of the object carrying the ESD
potential to the system and humidity will tend to
change the discharge current. For example, the
rise time of the discharge current varies with the
approach speed.
The Contact Discharge Method applies the ESD
current directly to the EUT. This method was
devised to reduce the unpredictability of the
ESD arc. The discharge current rise time is
constant since the energy is directly transferred
without the air-gap arc. In situations such as
hand held systems, the ESD charge can be directly
discharged to the equipment from a person already
holding the equipment. The current is transferred
on to the keypad or the serial port of the equipment
directly and then travels through the PCB and
finally to the IC.
The circuit models in
Figures 9
and
10
represent
the typical ESD testing circuit used for all three
methods. The C
S
is initially charged with the DC
power supply when the first switch (SW1) is on.
Now that the capacitor is charged, the second
switch (SW2) is on while SW1 switches off. The
voltage stored in the capacitor is then applied
through R
S
, the current limiting resistor, onto the
device under test (DUT). In ESD tests, the SW2
switch is pulsed so that the device under test
receives a duration of voltage.
For the Human Body Model, the current limiting
resistor (R
) and the source capacitor (C
) are
1.5k
an 100pF, respectively. For IEC-1000-4-
2, the current limiting resistor (R
) and the source
capacitor (C
S
) are 330
an 150pF, respectively.
The higher C
value and lower R
value in the
IEC1000-4-2 model are more stringent than the
Human Body Model. The larger storage capacitor
injects a higher voltage to the test point when
SW2 is switched on. The lower current limiting
resistor increases the current charge onto the test
point.
相關PDF資料
PDF描述
SP310ECP 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors
SP310ECT 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors
SP310EEP Header cable for SNAP 32 Channel digital modules and G4 digital racks -- 6 ft RoHS Compliant: No
SP310EET 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors
SP312ECA 5V High-Speed RS-232 Transceivers with 0.1uF Capacitors
相關代理商/技術參數
參數描述
SP233EET/TR 制造商:SIPEX 制造商全稱:Sipex Corporation 功能描述:High-Performance RS-232 Line Drivers/Receivers
SP233EET-L 功能描述:RS-232接口集成電路 5V SNGL SUPPLY RS-232 -40-85C RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝:
SP233EET-L/TR 功能描述:RS-232接口集成電路 5V SNGL SUPPLY RS-232 -40-85C RoHS:否 制造商:Exar 數據速率:52 Mbps 工作電源電壓:5 V 電源電流:300 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-100 封裝:
SP233RJT 功能描述:電流傳感電阻器 - SMD SP2 33R 5% TAPED RoHS:否 制造商:Vishay/Dale 電阻:10 mOhms 功率額定值:1 W 容差:1 % 外殼代碼 - in:2512 外殼代碼 - mm:6432 溫度系數:75 PPM / C 系列:WSL 工作溫度范圍:- 65 C to + 170 C 產品:Power Metal Strip Resistors Low Value
SP234A 制造商:SIPEX 制造商全稱:Sipex Corporation 功能描述:+5V Powered Multi-Channel RS-232 Drivers/Receivers
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*