- 您現在的位置：買賣IC網 > PDF目錄40389 > SRDA05-4 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, MS-012AA PDF資料下載
參數資料
| 型號： | SRDA05-4 |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE, MS-012AA |
| 封裝： | SOP-8 |
| 文件頁數： | 9/13頁 |
| 文件大?。?/td> | 272K |
| 代理商： | SRDA05-4 |
5
2006 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
SRDA3.3-4 through SRDA12-4
Device Connection Options for Protection of Four
High-Speed Lines
The SRDA TVS is designed to protect four data lines
from transient overvoltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V
F) the
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 1, 4, 6 and 7. The
negative reference is connected at pins 5 and 8.
These pins should be connected directly to a ground
plane on the board for best results. The path length is
kept as short as possible to minimize parasitic induc-
tance.
The positive reference is connected at pins 2 and 3.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
pins 2 & 3 directly to the positive supply rail (V
CC).
In this configuration the data lines are referenced
to the supply voltage. The internal TVS diode
prevents over-voltage on the supply rail.
2. The SRDA can be isolated from the power supply by
adding a series resistor between pins 2 and 3 and
V
CC. A value of 10k is recommended. The
internal TVS and steering diodes remain biased,
providing the advantage of lower capacitance.
3. In applications where no positive supply reference
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pins 2 and 3 are not connected. The
steering diodes will begin to conduct when the
voltage on the protected line exceeds the working
voltage of the TVS (plus one diode drop).
ESD Protection With RailClamps
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
the reference voltage plus the V
F
drop of the diode.
For negative events, the bottom diode will be biased
when the voltage exceeds the V
F
of the diode. At first
Applications Information
相關PDF資料 |
PDF描述 |
|---|---|
| SRDA3.3-4 | 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| SRDA3.3-4-LF | 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| SRDA3.3-4-LF-T13 | 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| SRDA3.3-4-T7 | 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| SRDA3.3-4-LF-T7 | 500 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SRDA05-4.T | 制造商:Semtech Corporation 功能描述:ESD Suppressor Diode Arrays ±15KV 8-Pin SOIC Tube |
| SRDA05-4.TB | 制造商:Semtech Corporation 功能描述:ESD Suppressor Diode Arrays |
| SRDA05-4.TBT | 功能描述:IC TVS ARRAY 4-LINE 5V 8SOIC RoHS:是 類別:過電壓，電流，溫度裝置 >> TVS - 二極管 系列:RailClamp® 產品目錄繪圖:SMB 600 Watt Top SMB 600 Watt Side 1 SMB 600 Watt Side 2 標準包裝:10 系列:- 電壓 - 反向隔離（標準值）:25.6V 電壓 - 擊穿:28.5V 功率（瓦特）:600W 電極標記:單向 安裝類型:表面貼裝 封裝/外殼:DO-214AA，SMB 供應商設備封裝:SMB 包裝:剪切帶 (CT) 產品目錄頁面:2386 (CN2011-ZH PDF) 其它名稱:P6SMB30AT3GOSCT |
| SRDA05-4.TBT | 制造商:Semtech Corporation 功能描述:TVS DIODE |
| SRDA05-4.TBT-CUT TAPE | 制造商:SEMTECH 功能描述:SRDA Series 20 V 8 pF SMT RailClamp?Low Capacitance TVS Diode Array - SOIC-8 |
發布緊急采購，3分鐘左右您將得到回復。