- 您現在的位置：買賣IC網 > PDF目錄31352 > SRV05-4.TG 300 W, UNIDIRECTIONAL, SILICON, TVS DIODE PDF資料下載
參數資料
| 型號： | SRV05-4.TG |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | 300 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| 封裝： | PLASTIC PACKAGE-6 |
| 文件頁數： | 5/8頁 |
| 文件大小： | 214K |
| 代理商： | SRV05-4.TG |
5
2003 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
SRV05-4
Device Connection Options for Protection of Four
High-Speed Data Lines
The SRV05-4 TVS is designed to protect four data lines
from transient over-voltages by clamping them to a
fixed reference. When the voltage on the protected
line exceeds the reference voltage (plus diode V
F) the
steering diodes are forward biased, conducting the
transient current away from the sensitive circuitry.
Data lines are connected at pins 1, 3, 4 and 6. The
negative reference (REF1) is connected at pin 2. This
pin should be connected directly to a ground plane on
the board for best results. The path length is kept as
short as possible to minimize parasitic inductance.
The positive reference (REF2) is connected at pin 5.
The options for connecting the positive reference are
as follows:
1. To protect data lines and the power line, connect
pin 5 directly to the positive supply rail (V
CC). In this
configuration the data lines are referenced to the
supply voltage. The internal TVS diode prevents
over-voltage on the supply rail.
2. The SRV05-4 can be isolated from the power
supply by adding a series resistor between pin 5
and V
CC. A value of 100k is recommended. The
internal TVS and steering diodes remain biased,
providing the advantage of lower capacitance.
3. In applications where no positive supply reference
is available, or complete supply isolation is desired,
the internal TVS may be used as the reference. In
this case, pin 5 is not connected. The steering
diodes will begin to conduct when the voltage on
the protected line exceeds the working voltage of
the TVS (plus one diode drop).
ESD Protection With RailClamps
RailClamps are optimized for ESD protection using the
rail-to-rail topology. Along with good board layout,
these devices virtually eliminate the disadvantages of
using discrete components to implement this topology.
Consider the situation shown in Figure 1 where dis-
crete diodes or diode arrays are configured for rail-to-
rail protection on a high speed line. During positive
duration ESD events, the top diode will be forward
biased when the voltage on the protected line exceeds
Data Line and Power Supply Protection Using Vcc as
reference
Data Line Protection with Bias and Power Supply
Isolation Resistor
Data Line Protection Using Internal TVS Diode as
Reference
Applications Information
相關PDF資料 |
PDF描述 |
|---|---|
| SRV08-4.TC | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| SRV08-4.TG | 150 W, UNIDIRECTIONAL, SILICON, TVS DIODE |
| SS0503SH | 0.5 A, 30 V, SILICON, SIGNAL DIODE |
| SS1003M3 | 1 A, 30 V, SILICON, SIGNAL DIODE |
| SS10P2CLHM3/86A | 5 A, 20 V, SILICON, RECTIFIER DIODE, TO-277A |
相關代理商/技術參數 |
參數描述 |
|---|---|
| SRV08-4 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RailClamp Low Capacitance TVS Diode Array / SOT-23 |
| SRV-1000-R | 制造商:JAMECO VALUEPRO 功能描述:POWER TRANSFORMER,VARIABLE,110/220VAC INPUT,0-240VAC OUTPUT, |
| SRV-120-KIT | 制造商:SAMLEX 功能描述: |
| SRV2.8-4 | 制造商:PROTEC 制造商全稱:Protek Devices 功能描述:ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY |
| SRV2.8-4-T7 | 制造商:ProTek Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。